997.2 Style LED Tail Lights Pair for Porsche 911 Carrera (1999-2004)
Free shipping to the lower 48 · Returns & refunds · Questions? Contact us
A narrow-body 996 Carrera picks up the 997.2 LED lens in place of the amber bulb section. GENSSI supplies the pair and the resistors for the Carrera, Carrera 4, and Targa, and the factory sockets move over.
Important Fitment Note: These fit the narrow-body 1999-2004 Carrera, Carrera 4, and Targa. They do not fit the Turbo, GT2, GT3, or Carrera 4S. This is the 997.2 lens shape. It is not the 991.2 sequential pair. Mount each resistor on metal. They get hot.
Fitment
| YEAR | MAKE / MODEL | FITS |
|---|---|---|
| 1999-2004 | Porsche 911 Carrera, Carrera 4, and Targa, narrow body | Yes |
| 1999-2004 | Porsche 911 Turbo, GT2, GT3, and Carrera 4S | No |
Specs
- Style: Red and clear 997.2-style lens with an oval LED center
- Bulbs: LED center with the factory sockets reused. Two resistors are in the box
- Sold as: Pair plus two resistors. Factory sockets transfer
- Fit: 1999-2004 narrow-body Carrera, Carrera 4, and Targa. Not the wide body
Interchange
99663149500, 99663149600
What's included
- 1x Driver tail light
- 1x Passenger tail light
- 2x Resistors
Installation — 1999-2004 Porsche 911 Carrera
- Open the engine cover and pull the carpet away from the lamp.
- Unplug the harness and pull the factory sockets out of the old lens. Those sockets go into the new lamp.
- Remove the nuts on the lamp studs and pull the lamp out.
- Fit the factory sockets into the new lamp. Mount each resistor against bare metal, clear of the carpet and the plastic engine trim. The resistors get hot.
- Plug the harness in, set the lamp, and tighten the nuts.
- Check tail, brake, turn, and reverse on both sides.
Buyer FAQ
Is this the 991.2 sequential pair? No. That pair is a different lens with a sequential signal. This one is the 997.2 oval LED shape for the narrow-body 996.
Does a Carrera 4S take these? No. The 4S, Turbo, GT2, and GT3 are wide-body cars and use a different lamp.
What has to be reused? The factory sockets. The box has the two lamps and two resistors, not new sockets.