Adaptive HID Xenon Headlights Pair for BMW X5 E70 (2007-2010)

Adaptive HID Xenon Headlights Pair for BMW X5 E70 (2007-2010)

$1,074.95
Passer aux informations sur le produit
Adaptive HID Xenon Headlights Pair for BMW X5 E70 (2007-2010)

Adaptive HID Xenon Headlights Pair for BMW X5 E70 (2007-2010)

$1,074.95
DS-63117289001

Free shipping to the lower 48 · Returns & refunds · Questions? Contact us

Replace hazy or damaged factory adaptive xenon headlights on your 2007-2010 BMW X5 (E70, pre-LCI) with this new pair. Bulbs and ballasts are not included per the listing.

Fitment

Year Make / Model Fits
2007-2010 BMW X5 E70 (pre-LCI) with factory adaptive xenon (HID) headlights Factory adaptive HID headlights

Will NOT fit: X5 with halogen headlights; 2011-2013 X5 LCI; X6.

Common Reasons to Replace

  • Yellowed, hazy, or oxidized lenses reducing light output
  • Cracked lens or broken mounting tabs
  • Moisture or condensation inside the housing
  • Collision damage

Specs

  • Low/high beam: bi-xenon HID projector
  • Adaptive (AHL): yes
  • Bulbs and ballasts: NOT included (per listing); reuse yours
  • DOT compliant
  • Quantity: Pair (Left + Right)
  • Condition: New

Interchange Part Numbers

OEM: 63117289001, 63117223749, 63127192571, 63117223750, 63127192572. Partslink: BM2518114, BM2519114.

What's Included

  • 1 x Driver side headlight assembly
  • 1 x Passenger side headlight assembly
  • Left and right headlights

Installation

  1. Tape the lens and fender edge for protection. Turn the wheel or remove it for access.
  2. Remove the wheel-arch trim and the front wheel-well liner (about 20 screws/clips).
  3. On the driver side, let the oil cooler hang by removing its 3 bolts; loosen the fender support bracket.
  4. Remove the 5 headlamp bolts, unplug the lamp and pull it out rearward through the wheel-well opening.
  5. Transfer your xenon bulbs, ballasts and AHL parts as needed, install the new lamp, refit the liner, then code/initialize the adaptive lights if a fault appears and aim the headlights.

Steps compiled from the Bimmerfest "Headlight assembly removal" E70 thread, the Xbimmers E70 headlight DIY and the Xoutpost E70 adaptive headlight (AHL) retrofit write-up. Professional installation and headlight aiming are recommended.

FAQs

Do these need coding?
Adaptive lamps may need coding/initialization with a BMW scan tool, or an "Adaptive Headlight Malfunction" warning can stay on. Reusing your original AHL modules where applicable avoids most coding.

Will these fit a 2011+ X5 LCI?
No. These are the 2007-2010 pre-LCI adaptive lamps.

Are bulbs and ballasts included?
No. Per the listing, transfer your factory xenon bulbs and ballasts.

Do I need to remove the front bumper to replace these headlights?
No. The lamp comes out rearward through the wheel well after the liner is removed.

Can I install LED or HID kits?
Not applicable. These are factory-style HID/Xenon housings; reuse your factory HID bulbs and ballasts.

Vous aimerez peut-être aussi