GENSSI hero — all clear red LED tail lights 4pc Lexus LS400 (1995-1997) white background

All Clear Red LED Tail Lights 4pc for Lexus LS400 (1995-1997)

$482.95
Passer aux informations sur le produit
GENSSI hero — all clear red LED tail lights 4pc Lexus LS400 (1995-1997) white background

All Clear Red LED Tail Lights 4pc for Lexus LS400 (1995-1997)

$482.95
DS-LS400-TAIL-ALL-CLR-RED-LED-4PC-1995-1997

Free shipping to the lower 48 · Returns & refunds · Questions? Contact us

Muted stock UCF20 reds hide the LS rear—this all-clear red LED 4pc set puts a sharper, brighter signature on the 1995-1997 LS400. GENSSI's Lexus LS400 kit is a vehicle-specific outer+inner clear LED set that bolts in and plugs into the factory harness.

Fitment

YEAR MAKE / MODEL FITS
1995-1997 Lexus / LS400 UCF20 Yes

Specs

  • Style: Chrome housing, all-clear lens with red LED sections (outer + inner)
  • Bulbs: LED / Incandescent hybrid — LED sections with remaining socketed bulbs; x6 LED resistors included
  • Sold as: All-clear red LED 4pc outer + inner tail light set
  • Fit: Direct-fit all-clear red LED 4pc tails for 1995-1997 Lexus LS400 UCF20

Interchange

81561-50040, 81560-50040, 81591-50040, 81590-50040, 81551-50040, 81550-50040, 81581-50040, 81580-50040

What's included

  • 1x Driver outer all-clear LED tail light
  • 1x Passenger outer all-clear LED tail light
  • 1x Driver inner all-clear LED tail light
  • 1x Passenger inner all-clear LED tail light
  • x6 LED resistors

Installation — Lexus LS400 UCF20 (1995-1997)

  1. Park on level ground, set the parking brake, switch lights and ignition off, and disconnect the negative battery cable.
  2. Open the trunk. Pull back the rear side and deck trim to reach the outer and inner tail light fasteners and harness connectors.
  3. Disconnect each harness. Remove the mounting fasteners and slide the factory outer and inner assemblies straight back out of the body openings.
  4. Seat each new all-clear LED assembly, connect the included resistors per the harness labeling, reconnect the plugs, and snug the fasteners while checking quarter-panel and deck gaps.
  5. Refit the trunk trim, reconnect the battery, and test parking, brake, turn, and reverse on both sides.

Buyer FAQ

Is this outer and inner? Yes. The kit is four assemblies—left/right outer plus left/right inner for the UCF20 rear.

Why are resistors included? Six LED resistors are included for the LED sections so the factory turn / brake circuits stay stable after the swap.

Do I splice wiring? No. After trunk access, the assemblies bolt in and plug into the factory harness with the included resistors inline as labeled.

Vous aimerez peut-être aussi