GENSSI hero — all clear tail lights pair for Dodge Neon (2003-2005) on white

All Clear Tail Lights Pair for Dodge Neon (2003-2005)

$195.95
Passer aux informations sur le produit
GENSSI hero — all clear tail lights pair for Dodge Neon (2003-2005) on white

All Clear Tail Lights Pair for Dodge Neon (2003-2005)

$195.95
DS-NEON-TAIL-ALL-CLR-PAIR-2003-2005

Free shipping to the lower 48 · Returns & refunds · Questions? Contact us

The 2003-2005 Neon's red lenses look plain on a rear that already has the facelift shape, and this all-clear pair whites those corners out by day while the included red 3157 still shows the brake and the turn. GENSSI's left and right assemblies fit the facelift Neon, including SRT-4, and they reuse the factory sockets with no splicing.

Important Fitment Note: Fits the 2003-2005 Neon facelift, including SRT-4. The 2000-2002 Neon uses a different tail lamp.

Fitment

YEAR MAKE / MODEL FITS
2003-2005 Dodge / Neon, including SRT-4 Yes
2000-2002 Dodge / Neon No

Specs

  • Style: All-clear lens on a black inner housing; polycarbonate lens with UV protection and high impact resistance
  • Bulbs: Incandescent. Bulbs included: 2x 3157 red (park, brake, and turn) and 2x 921 clear (reverse). Sockets are not included — reuse the factory sockets
  • Sold as: Pair — left and right tail light assemblies, with bulbs
  • Fit: Direct replacement for 2003-2005 Dodge Neon facelift models, including SRT-4, R/T, SE, and SXT; plug and play on the factory sockets, no splicing

Interchange

5303543AD, 5288527AM, 5303542AD, 5288526AM

What's included

  • 1x Driver (left) all-clear tail light assembly
  • 1x Passenger (right) all-clear tail light assembly
  • 2x 3157 red bulbs
  • 2x 921 clear bulbs

Installation — Dodge Neon (2003-2005)

  1. Open the trunk. At the rear edge of the trunk liner, pull the push-pin out with pliers, then fold the liner forward off the closure panel so the back of the lamp is exposed.
  2. Remove the three plastic nuts with a 13 mm socket. They hold the lamp studs to the closure panel.
  3. Pull the lamp out far enough to reach the sockets. Twist each socket counterclockwise and pull it out of the housing. The upper socket is reverse and the lower socket is park, brake, and turn. Sockets are not in the box.
  4. Move the sockets into the new housing. Push the included red 3157 into the park, brake, and turn socket, and the included clear 921 into the reverse socket. Lock both sockets clockwise.
  5. Set the lamp studs through the holes in the closure panel. Install the three nuts and finish them by hand at about 40 in-lbs so the plastic nuts do not strip.
  6. Fold the liner back over the closure panel and press the push-pin in. Check park, brake, turn, and reverse, then do the other side the same way.

Buyer FAQ

Is this a clear cover? No. These are full left and right housings with an all-clear lens. They replace the factory lamps on the 2003-2005 facelift Neon.

Do I cut or splice wires? No. Reuse the factory sockets. The box includes a red 3157 for park, brake, and turn, and a clear 921 for reverse, one of each per side.

Does this fit an SRT-4 or a 2000 Neon? It fits the 2003-2005 Neon, including SRT-4, R/T, SE, and SXT. Left matches 5303543AD and 5288527AM. Right matches 5303542AD and 5288526AM. The 2000-2002 Neon is the earlier tail lamp and does not fit.

Vous aimerez peut-être aussi