Black Amber Corner Halogen Headlights Pair for Nissan Cube (2009-2014)
$312.95
Passer aux informations sur le produit
Black Amber Corner Halogen Headlights Pair for Nissan Cube (2009-2014)
$312.95
DS-260601FC0B
Free shipping to the lower 48 · Returns & refunds · Questions? Contact us
Fitment warning: These headlights fit the 2009-2014 Nissan Cube (Z12), including Base, S, SL and Krom, with the factory halogen assemblies (26060-1FC0B / 26010-1FC0B). They are a driver and passenger pair. H4 dual-beam bulbs come already installed.
Replace faded or cracked factory halogen lamps on your 2009-2014 Nissan Cube with this OE-style pair. Each black housing has the clear halogen beam and the amber corner marker, and it bolts to the factory points and plugs into the factory connectors, with no splicing.
Fitment
| Years | Vehicle | Notes |
|---|---|---|
| 2009-2014 | Nissan Cube | Z12 Base, S, SL and Krom with factory halogen headlights. |
Specs
- Sold as: driver and passenger pair
- Housing: black, clear lens, amber corner
- Low and high beam: H4 halogen (dual beam)
- Bulbs, sockets and connectors included, already installed
- DOT and SAE compliant
- Plugs into the factory connectors (no splicing)
In the Box
- Driver-side halogen headlight with amber corner
- Passenger-side halogen headlight with amber corner
- H4 bulbs, sockets and connectors (already installed)
Interchange References
Replaces the original assemblies commonly crossed with 26060-1FC0B, 26010-1FC0B, NI2502192, NI2503192.
Installation: Nissan Cube (2009-2014)
On the 2009-2014 Cube the front bumper cover comes off so you can reach the headlight bolts. Turn the lights and ignition off before you start.
- Open the hood. Remove the upper bumper-cover fasteners and the clips and screws at each wheel-arch corner and along the lower edge.
- Release the bumper cover at the fenders, unplug any bumper lamps or sensors as equipped, and set the cover aside.
- Remove the headlight mounting bolts, slide the lamp forward and unplug the connectors.
- Plug the new lamp in, seat the locating points, and start all bolts by hand before tightening them evenly.
- Refit the bumper cover. Test low beam, high beam and turn signal, then aim the beams.
Frequently Asked Questions
Which vehicles do these headlights fit?
2009-2014 Nissan Cube (Z12), including Base, S, SL and Krom, with factory halogen headlights. Compare your current lamps with our photos before ordering.
Is this a pair or a single lamp?
This is a complete driver and passenger pair, not a single-side lamp.
Are bulbs included?
Yes. The H4 dual-beam bulbs come already installed.
Do I need to cut or splice any wiring?
No. Each lamp plugs into the factory connectors.
How are they installed on a 2009-2014 Nissan Cube?
The front bumper cover comes off so you can reach the headlight bolts. Remove the lamp, install the new one, refit the cover and aim the beams afterward.