Black Clear LED Low/Hi Headlights for Subaru Legacy / Outback (2005-2007)
Free shipping to the lower 48 · Returns & refunds · Questions? Contact us
Cloudy stock BL/BP lamps flatten the face—black clear LED Low/Hi headlights put a sharp dual-beam signature on 2005-2007 Legacy and Outback. GENSSI's Subaru pair is a vehicle-specific LED Low/Hi set that bolts in and plugs into the factory harness.
Fitment
| YEAR | MAKE / MODEL | FITS |
|---|---|---|
| 2005-2007 | Subaru / Legacy | Yes |
| 2005-2007 | Subaru / Outback | Yes |
Specs
- Style: Black housing, clear lens, LED Low/Hi beam
- Bulbs: LED Low (H7) + LED High (9005); signal/parking 3157 Incandescent as equipped
- Sold as: Black clear LED Low/Hi headlight pair
- Fit: Direct-fit LED Low/Hi headlights for 2005-2007 Subaru Legacy and Outback
Interchange
84001-AG11A, 84001-AG11B, 84001-AG43C, 84001-AG10A, 84001-AG10B, 84001-AG42C, SU2502116, SU2502123, SU2503116, SU2503123
What's included
- 1x Driver black clear LED Low/Hi headlight
- 1x Passenger black clear LED Low/Hi headlight
- LED Low Beam bulbs (H7)
- LED High Beam bulbs (9005)
Installation — Subaru Legacy / Outback (2005-2007)
- Park on level ground, set the parking brake, switch lights and ignition off, and disconnect the negative battery cable.
- Open the hood. Remove the grille trim, upper bumper fasteners, and access covers needed to reach the headlight retaining bolts and clips.
- Support each headlight, remove the retaining bolts / clips, press the connector lock tabs, disconnect the harnesses, and pull the factory lamp straight forward off the locating pins.
- Install the included H7 Low and 9005 High LED bulbs into the new housings. Transfer any brackets or adjusters from the factory lamps only where the new assemblies clearly lack them.
- Align each new LED headlight on the locating pins, reconnect the harness plugs until the lock tabs click, snug the fasteners evenly while checking hood / fender / grille gaps, and leave trim loose until testing is done.
- Reconnect the battery, test low beam, high beam, parking, and signals, aim the beams on a level surface, then refit the grille and upper bumper trim.
Buyer FAQ
Are these halogen projectors? No. Low and high beams are LED. H7 Low and 9005 High LED bulbs are included—this is not a halogen-only kit.
Which years of Legacy / Outback fit? 2005-2007 Legacy and Outback BL/BP only—not earlier or later generations.
Do I splice wiring? No. After grille / upper bumper access, the assemblies bolt in and plug into the factory harness.