Black D2S projector headlight pair for a halogen Mercedes W203 sedan

Black D2S Projector Headlights for Mercedes W203 Sedan Halogen (2001-2004)

$167.95
Passer aux informations sur le produit
Black D2S projector headlight pair for a halogen Mercedes W203 sedan

Black D2S Projector Headlights for Mercedes W203 Sedan Halogen (2001-2004)

$167.95
DS-W203-HEAD-D2S-SEDAN-HALOGEN-2001-2004

Free shipping to the lower 48 · Returns & refunds · Questions? Contact us

A halogen W203 sedan loses the reflector buckets and picks up black projectors with a D2S low beam. GENSSI supplies the pair for the 2001-2004 sedan and wagon.

Important Fitment Note: This is the halogen sedan and wagon housing with a D2S projector in the low beam. It does not fit the sport coupe, and it does not fit the 2005-2007 facelift. A factory xenon car already has its own lamp. You supply the D2S bulbs and 35W ballasts. The holders in the box do not fit every aftermarket ballast.

Fitment

YEAR MAKE / MODEL FITS
2001-2004 Mercedes-Benz C-Class W203 sedan and wagon, factory halogen Yes
2001-2005 Mercedes-Benz C-Class W203 sport coupe No
2005-2007 Mercedes-Benz C-Class W203 facelift sedan and wagon No

Specs

  • Style: Black housing with a clear lens and a D2S low-beam projector
  • Bulbs: D2S low beam. Bulbs and 35W ballasts are not in the box. H7 high beam, PY21W turn, and W5W park transfer
  • Sold as: Pair of headlights and two ballast holders. D2S bulbs and ballasts are separate
  • Fit: 2001-2004 W203 sedan and wagon with factory halogen. Not the sport coupe. Not 2005-2007. Not a factory xenon car

Interchange

2038200961, 2038201061

What's included

  • 1x Driver headlight
  • 1x Passenger headlight
  • 2x Ballast holders

Installation — 2001-2004 Mercedes-Benz W203 Sedan

  1. Open the hood. Remove the 8 mm screw in the panel above the headlight and the 8 mm bolt at the outer top of the lamp.
  2. Turn the front wheel in. Take out the push pins and 10 mm nuts on the front of the wheel-well liner and fold the liner back. Remove the T20 screw where the bumper meets the fender and pull the long bumper-to-fender clip out toward the front.
  3. Pull the bumper down enough to reach the inner 8 mm headlight bolt. Remove that bolt, then the remaining 8 mm bolt on the lamp.
  4. Unplug the headlight. Take the two T20 screws out of the black bracket on the old lamp and move that bracket onto the new housing.
  5. Mark how deep the side bolt sits before it comes out. That bolt also sets the bumper gap. Mount your D2S bulb and 35W ballast with the holder in the box, set the lamp in, and put the three 8 mm bolts back in the same holes. Refit the bumper clip, T20 screw, and liner, then aim the beams.

Buyer FAQ

Does the sport coupe use this pair? No. The coupe lamp is a different housing. This pair is the 2001-2004 sedan and wagon, part 2038200961 and 2038201061.

Is a factory xenon car the same lamp? No. This housing is for a halogen car. The D2S bulb and ballast are parts you add. They are not already on a halogen W203.

Does a 2006 sedan fit? No. The 2005-2007 facelift uses a different headlight.

Vous aimerez peut-être aussi