Black Full LED Projector Headlights Pair w/ Module for Chrysler Pacifica (2021-2026)
$357.95
Passer aux informations sur le produit
Black Full LED Projector Headlights Pair w/ Module for Chrysler Pacifica (2021-2026)
$357.95
DS-68428559AC
Free shipping to the lower 48 · Returns & refunds · Questions? Contact us
Replace cracked or hazy headlights on your 2021-2026 Pacifica with this brand-new black full LED projector pair with LED module.
Fitment
| Year | Make / Model | Fits |
|---|---|---|
| 2021-2026 | Chrysler Pacifica with factory LED projector headlights | Factory LED headlights |
Will NOT fit: Halogen models; 2017-2020 Pacifica; Voyager.
Common Reasons to Replace
- Yellowed, hazy, or oxidized lenses reducing light output
- Cracked lens or broken mounting tabs
- Moisture or condensation inside the housing
- Collision damage
Specs
- Low/high beam, DRL, turn: built-in LED
- LED module: included
- DOT compliant
- Quantity: Pair (Left + Right)
- Condition: New
Interchange Part Numbers
OEM: 68428559AC, 68428559AA, 68428559AB, 68428558AA, 68428558AB. Partslink: CH2502342, CH2503342.
What's Included
- 1 x Driver side headlight assembly
- 1 x Passenger side headlight assembly
- LED module included
Installation
- Disconnect the negative battery cable. Remove the belly pan, the wheelhouse-shield screws and fascia-to-fender screws on both sides.
- Remove the grille push pins across the top, release the fascia clips, unplug both fascia harnesses and lift the fascia off.
- Unplug the headlamp, remove the upper bolts and push pin, the lower screw and the side bolt, unclip the harness and lift the lamp out.
- Transfer the fascia mounting bracket (five screws) to the new lamp, install it (top bolts 7 N-m), refit the fascia and aim the headlights.
- Note: this is the Chrysler procedure for 2017-2020; the 2021+ refresh uses the same fascia-off approach.
Steps compiled from Chrysler service procedure quoted on PacificaForums "Headlight Assembly Removal" thread. Professional installation and headlight aiming are recommended.
FAQs
Will these fit a 2020 Pacifica?
No. 2021 refresh and newer only.
Will these fit a halogen Pacifica?
No. Factory LED models only.
Do I need to remove the front bumper to replace these headlights?
Yes. The front fascia has to come off to reach the headlamp bolts.
Can I install HID or LED kits?
Not applicable. The low and high beams are built-in factory LED; there is no replaceable headlight bulb for an LED or HID kit.