Black Full LED Projector Headlights Pair w/ Switchback DRL for Ford Taurus w/ Factory halogen (2013-2019)
$498.95
Passer aux informations sur le produit
Black Full LED Projector Headlights Pair w/ Switchback DRL for Ford Taurus w/ Factory halogen (2013-2019)
$498.95
DS-DG1Z13008C
Free shipping to the lower 48 · Returns & refunds · Questions? Contact us
Upgrade your 2013-2019 Ford Taurus with factory halogen headlights to this brand-new pair of black full-LED projector headlights with switchback LED DRL and turn signals.
Fitment
| Year | Make / Model | Fits |
|---|---|---|
| 2013-2019 | Ford Taurus (sedan) | Factory halogen headlights |
Will NOT fit: Cars with the HID/Xenon headlight connector (use the matching version); 2010-2012 Taurus; Police Interceptor unless your lamp matches.
Common Reasons to Replace
- Yellowed, hazy, or oxidized lenses reducing light output
- Cracked lens or broken mounting tabs
- Moisture or condensation inside the housing
- Collision damage
Specs
- Housing: Black
- Low/high beam: LED projector (built in)
- DRL: switchback LED (white)
- Turn signal: switchback LED (amber)
- DOT compliant
- Quantity: Pair (Left + Right)
- Condition: New
Interchange Part Numbers
OEM: DG1Z13008C. Partslink: .
What's Included
- 1 x Driver side headlight assembly
- 1 x Passenger side headlight assembly
- All LEDs built in
Installation
- Open the hood and remove the screws and clips along the top of the front bumper cover.
- Remove the wheel-well screws, release the side clips and pull the bumper cover off.
- Unplug the headlamp, remove the upper and front bolts (3.2 Nm), the side bolt (7 Nm) and the push-pin rivet, and pull the lamp out.
- Plug in the new LED lamp, check low, high, DRL and the switchback turn signal, then bolt it in, refit the bumper and aim.
Steps compiled from the Ford Taurus service manual (exterior lighting), FordTaurus.net and Diode Dynamics Taurus fitment notes. Professional installation and headlight aiming are recommended.
FAQs
What bulbs do these headlights use?
None to buy. The low/high beam, DRL and turn signal are all built-in LEDs.
Why are there two versions for the 2013-2019 Taurus?
Factory HID and halogen Taurus headlights use different connectors. This pair is for cars with factory halogen headlights; choose the version that matches yours.
Do I need to remove the front bumper to replace these headlights?
Yes. The 2013-2019 Taurus bumper cover has to come off; each headlight is then held by an upper bolt, a front bolt, a side bolt and a push-pin.
Can I install HID or LED kits?
Not applicable. These headlights already have built-in LED low/high beams.