Black Halogen Headlights Pair for Honda Accord Coupe (2008-2012)

Black Halogen Headlights Pair for Honda Accord Coupe (2008-2012)

$179.95
Passer aux informations sur le produit
Black Halogen Headlights Pair for Honda Accord Coupe (2008-2012)

Black Halogen Headlights Pair for Honda Accord Coupe (2008-2012)

$179.95
DS-33150TE0A01

Free shipping to the lower 48 · Returns & refunds · Questions? Contact us

New black-housing halogen headlight pair for the 2008-2012 Honda Accord 2-door coupe, with amber side reflector. Projector-style H11 low beam and 9005 high beam. Bulbs are not included.

Fitment

Year Make / Model Fits
2008-2012 Honda / Accord Coupe (2-door) Factory halogen headlights

Will NOT fit: the 4-door Accord sedan, Accord Crosstour, or coupes with factory HID headlights.

Common Reasons to Replace

  • Yellowed, hazy, or cracked factory lenses cutting light output
  • Moisture or condensation inside the housing
  • Broken mounting tabs or collision damage
  • Refreshing the front end with a new black look

Specs

  • Light type: Halogen (H11 low + 9005 high)
  • Housing: Black, clear lens, amber side reflector
  • Bulbs: Low beam H11, high beam 9005, turn signal 1157NA, side marker W5W (bulbs NOT included)
  • Lens: Polycarbonate; housing: polypropylene
  • DOT & SAE compliant
  • Fitment type: Direct replacement, plug-and-play connectors
  • Quantity: Pair (Left + Right)
  • Condition: New

Interchange Part Numbers

OEM: 33100-TE0-A01, 33150-TE0-A01, 33100-TE0-A11, 33150-TE0-A11 · Partslink: HO2502135, HO2503135

What's Included

  • 1 x Driver-side headlight assembly
  • 1 x Passenger-side headlight assembly
  • Bulbs not included — fits Low beam H11, high beam 9005, turn signal 1157NA, side marker W5W

Installation (2008-2012 Honda Accord Coupe)

Tools: 10 mm socket and ratchet, Phillips screwdriver, trim clip tool.

  1. Turn off the lights and open the hood.
  2. Remove the upper fender trim pieces.
  3. Remove the front bumper cover (top clips and bolts, wheel-well screws, and the lower screws) and set it aside.
  4. Remove the bumper absorber if it blocks the lower bolt.
  5. Remove the 3 10 mm headlight bolts, pull the lamp out slightly, release the harness clip and unplug the bulb connectors.
  6. Transfer the bulbs and any brackets bolted to the old housing onto the new lamp.
  7. Install the new lamp, reconnect, test, refit the bumper, and adjust the aim.

Steps based on the Honda Accord 2008-2012 (2-door) service manual headlight replacement procedure.

FAQ

Will these fit my Accord sedan?
No. The coupe and sedan headlights have different shapes. This pair is for the 2-door coupe only.

Does the bumper have to come off?
Yes. Honda's procedure removes the front bumper and absorber to reach the three 10 mm headlight bolts.

What bulb sizes do these use?
Low beam H11, high beam 9005, turn signal 1157NA, side marker W5W (bulbs NOT included).

Can I put LED bulbs in these?
Yes. These are halogen housings, so H11/9005 LED conversion kits fit. Use a quality kit with a CANbus decoder if you see flicker or a bulb-out warning, and re-aim the beams after install.

Vous aimerez peut-être aussi