Black Halogen Headlights Pair w/ LED DRL & Bulbs for Cadillac XT5 (2017-2019)
Free shipping to the lower 48 · Returns & refunds · Questions? Contact us
Replace hazy or cracked headlights on your 2017-2019 Cadillac XT5 with factory halogen headlights with this new black pair with LED DRL. Bulbs are included.
Fitment
| Year | Make / Model | Fits |
|---|---|---|
| 2017-2019 | Cadillac XT5 with factory halogen headlights (5-pin connector) | Factory halogen headlights |
Will NOT fit: XT5 with factory HID/LED or 10-pin connector; 2020+ XT5.
Common Reasons to Replace
- Yellowed, hazy, or oxidized lenses reducing light output
- Cracked lens or broken mounting tabs
- Moisture or condensation inside the housing
- Collision damage
Specs
- Type: Halogen
- DRL: LED
- Connector: 5-pin (per listing)
- Bulbs: included; match your factory bulbs (reuse them if needed)
- Housing: Black
- DOT compliant
- Quantity: Pair (Left + Right)
- Condition: New
Interchange Part Numbers
OEM: 84496130, 23386128, 84167549, 23386129, 84167550. Partslink: GM2503441, GM2502441.
What's Included
- 1 x Driver side headlight assembly
- 1 x Passenger side headlight assembly
- Left and right headlights
- Bulbs included (per listing)
Installation
- Open the hood, slide the rubber seal off its hooks, remove the plastic clips and the top cover, then remove the six 10 mm bolts beneath it.
- Turn the wheels and remove the Phillips screws along the front of each wheel well and the 7 mm bolt where the bumper meets the wheel arch; remove the three bolts under the front pan.
- Pull the bumper cover out at the wheel arches to release the clips up to the headlights, then lift and pull it forward and unplug the park-assist connector.
- Remove the three 10 mm headlamp bolts, unplug the lamp and pull it out.
- Install the new lamp, reconnect, refit the bumper cover and aim the headlights.
Steps compiled from Cadillac Owners Forum "DIY removal of front bumper to access lights" (XT5); Remont-bampera "Cadillac XT5 2016-2024: How to Remove the Bumpers". Professional installation and headlight aiming are recommended.
FAQs
How do I check my connector?
Per the listing, these fit the 5-pin halogen lamp, not the 10-pin HID lamp. Check the plug on your old headlight.
Will these fit a 2020 XT5?
No. The 2020 refresh uses a different lamp; this listing covers 2017-2019.
Do I need to remove the front bumper to replace these headlights?
Yes. The XT5 front bumper cover comes off to reach the three headlamp bolts.
What bulb sizes do these use?
The listing images do not state the bulb sizes. Bulbs are included; match your factory bulb sizes if you ever replace them.
Can I install LED or HID kits?
Yes. This is a halogen housing, so a plug-in LED or HID kit in your factory bulb size can be used. Aim the headlights afterward.