Black Halogen Headlights Pair with Projector Fog Lights for Volkswagen Golf / GTI Mk4 (1999-2006)
$144.95
Passer aux informations sur le produit
Black Halogen Headlights Pair with Projector Fog Lights for Volkswagen Golf / GTI Mk4 (1999-2006)
$144.95
DS-296451023626
Free shipping to the lower 48 · Returns & refunds · Questions? Contact us
Fitment warning: These twin-round headlights fit the Mk4 Volkswagen Golf hatchback (1999.5-2006) and Mk4 GTI (1999.5-2005) with factory halogen headlights only. They will not fit cars with factory HID / xenon headlights, the R32, the 2006 and newer Mk5 GTI 2.0T, the Mk4 Jetta / Bora, the Cabrio (it uses the older Mk3-based lamp), or a 1999 Golf III carry-over car with the older body. Each lamp has the fog light built in; if your car did not come with factory fog lights, the fog section will not light without the factory fog switch and wiring. Bulbs are not included.
Bring back the classic Mk4 face. This black-housing pair replaces yellowed, hazy or cracked twin-round Golf and GTI headlights with crisp clear lenses, deep chrome reflectors and a projector-style fog light built into the bottom of each lamp. The black housing gives the car a cleaner, darker look while keeping the original shape, mounting points and connectors.
Fitment
| Years | Vehicle | Notes |
|---|---|---|
| 1999-2006 | Volkswagen Golf | Mk4 hatchback (2- and 4-door) with factory halogen headlights, new Mk4 body from the 1999.5 model year on. GL, GLS, TDI and similar trims. |
| 1999-2005 | Volkswagen GTI | Mk4 GTI hatchback (GLS, GLX, 1.8T, VR6, 337, 20th Anniversary) with factory halogen headlights. |
Specs
- Sold as: driver and passenger pair (2 lamps, fog light built into each)
- Housing: black, clear lens
- Low and high beam: halogen reflector
- Fog light: built-in projector-style fog lens
- Bulbs: H7 low beam, H1 high beam, H3 fog, PY21W turn signal (bulbs not included)
- DOT and SAE compliant
- Mounts to the factory points and plugs into the factory connectors (no splicing)
In the Box
- Driver-side headlight with built-in projector fog light
- Passenger-side headlight with built-in projector fog light
Installation: Volkswagen Golf / GTI Mk4 (1999-2006)
On the Mk4 Golf and GTI the lower headlight bolts are hidden behind the front bumper cover, so plan on taking the cover off. It is a manageable driveway job with Torx bits and a helper. Turn the lights and ignition off before you start.
- Open the hood and remove the grille, then the Torx bolts and clips that hold the front bumper cover at the top, in each wheel well and underneath.
- Unplug the side markers and any fog light connectors, then slide the bumper cover forward and set it on a soft surface.
- Unplug the headlight connector, remove the upper and lower headlight mounting bolts and slide the lamp forward out of the opening.
- Fit your H7, H1, H3 and turn signal bulbs to the new lamp, set it into the opening and start all bolts by hand before tightening, so the gaps to the hood and fender stay even.
- Reconnect the headlight, refit the bumper cover and grille, then test low, high, fog and turn signal functions and aim the beams.
Frequently Asked Questions
Which vehicles do these headlights fit?
Mk4 Volkswagen Golf hatchbacks (1999.5-2006) and Mk4 GTI (1999.5-2005) with factory halogen headlights. They do not fit the R32, factory HID cars, the Mk5 GTI 2.0T, the Mk4 Jetta / Bora or the Cabrio. Compare your current lamps with our photos before ordering.
Is this a pair or a single lamp?
This is a complete driver and passenger pair, not a single-side lamp.
What bulbs do I need?
Each lamp takes an H7 low beam, H1 high beam, H3 fog and PY21W turn signal bulb. Bulbs are not included, so reuse yours or buy new ones.
Is the fog light really built in?
Yes. The fog light sits in the bottom of each headlight, like the factory Mk4 lamp. It only lights if your car has the factory fog light switch and wiring.
Do I need to cut or splice any wiring?
No. Each lamp plugs into the factory connectors.
How are they installed on a Mk4 Volkswagen Golf / GTI?
Take off the grille and front bumper cover, unplug the headlight, remove the upper and lower mounting bolts and slide it out. Move your bulbs over, bolt in the new lamp, refit the bumper and aim the beams.