Black Halogen Projector Headlights Pair for Chevrolet Malibu (2013-2015)

Replace yellowed, cracked or foggy headlights on your 2013-2015 Chevy Malibu with this brand-new pair of black halogen projector headlight assemblies, bulbs and mounting hardware included.

Fitment

Will NOT fit: Malibu LTZ with factory HID/Xenon; 2016+ Malibu; 2016 Malibu Limited is a 2013-2015-style car, so compare your lamp before ordering.

Common Reasons to Replace

• Yellowed, hazy, or oxidized lenses reducing light output
• Cracked lens or broken mounting tabs
• Moisture or condensation inside the housing
• Collision damage

Specs

• Housing: Black
• Lens: Clear
• Type: Halogen projector
• Turn/marker: amber
• Bulbs: included (size not stated in listing)
• DOT compliant
• Quantity: Pair (Left + Right)
• Condition: New

Interchange Part Numbers

OEM: 23294939, 25919067, 25919066. Partslink: GM2502362, GM2503362.

What's Included

• 1 x Driver side headlight assembly
• 1 x Passenger side headlight assembly
• Bulbs and mounting screws included

Installation

1. Disconnect the battery, open the hood and remove the radiator/upper fascia cover fasteners.
2. Raise the car, remove the front wheel and peel back the wheel-well liner.
3. Remove the fascia-to-fender bolts behind the liner and the lower fascia fasteners, then gently pull the bumper end away from the fender.
4. Remove the headlight mounting bolts, pull the lamp forward and unplug it.
5. Install the new lamp, test all functions, refit the fascia and aim the headlights. Do not over-adjust the adjusters.

Steps compiled from Design News, Ryan's Auto Care and HeadlightSize Malibu guides. Professional installation and headlight aiming are recommended.

FAQs

What bulb sizes do these headlights use?
Bulbs are included; the listing does not state the headlight bulb size, so match your factory bulb size if you ever replace them.

Do I need to remove the front bumper to replace these headlights?
For the full assembly, yes on most cars: remove the radiator cover, the wheel-well liner fasteners and the fascia bolts, then pull the bumper end away to reach the headlight bolts. Bulb-only changes can usually be done from the engine bay.

Will these fit a Malibu LTZ with HID?
No. They are for halogen-equipped cars only. HID LTZ cars use a different lamp and ballast.

Can I install HID or LED kits?
Yes. This is a halogen housing, so a plug-in LED or HID kit in your factory bulb size can be used. Aim the lights afterward.