Black Halogen Projector Headlights Pair for Dodge Dart (2013-2016)
Free shipping to the lower 48 · Returns & refunds · Questions? Contact us
Replace hazy headlights on your 2013-2016 Dodge Dart with factory halogen headlights with this new black-trim pair.
Fitment
| Year | Make / Model | Fits |
|---|---|---|
| 2013-2016 | Dodge Dart with factory halogen headlights | Factory halogen headlights |
Will NOT fit: HID cars (see our HID version).
Common Reasons to Replace
- Yellowed, hazy, or oxidized lenses reducing light output
- Cracked lens or broken mounting tabs
- Moisture or condensation inside the housing
- Collision damage
Specs
- Low/high beam: 9005 / HB3
- Trim: Black
- DOT compliant
- Quantity: Pair (Left + Right)
- Condition: New
Interchange Part Numbers
OEM: 68085141AL, 68085141AA, 68085141AB, 68085141AC, 68085141AD, 68085141AE, 68085141AF, 68085141AG, 68085141AH, 68085141AI, 68085141AJ, 68085141AK, 68085140AA, 68085140AB, 68085140AC, 68085140AD, 68085140AE, 68085140AF, 68085140AG, 68085140AH, 68085140AI, 68085140AJ, 68085140AK. Partslink: CH2502240, CH2503240.
What's Included
- 1 x Driver side headlight assembly
- 1 x Passenger side headlight assembly
- Left and right headlights
Installation
- Remove the upper radiator cover (10 mm bolts and push pins).
- Remove the push pins and 10 mm bolts along the top of the fascia, and the Phillips/8 mm screws underneath.
- Remove the wheel-well screws (8 mm) on each side, then pull the fascia corners out of the side clips; unplug fog lights and the active grille shutter connector before removing the fascia.
- Remove the headlamp bracket (two 10 mm nuts and three 10 mm bolts), then the 10 mm rear bolt and the angled 7/8 mm lower screw.
- Release the push pin, unplug the round harness connector and bulb connectors (driver side: free the harness clip on the bracket first).
- Install the new lamp in reverse (bulbs are pre-installed per the listing) and adjust the aim with the Phillips adjuster.
Steps compiled from 1A Auto "How to Replace Headlight Assemblies 2013-2016 Dodge Dart"; Dodge-Dart.org forum "Step by step on headlight removal" and "How to take off front bumper fascia". Professional installation and headlight aiming are recommended.
FAQs
What bulb size do these use?
HB3 (9005) low/high, per the listing.
Will these fit a Dart with HID?
No. See our HID version.
Do I need to remove the front bumper to replace these headlights?
Yes. The Dart fascia comes off to reach the headlamp bracket bolts.
Can I install LED or HID kits?
Yes. This is a halogen housing, so a plug-in LED or HID kit in your factory bulb size can be used. Aim the headlights afterward.