Black Halogen Projector LED DRL Headlights Pair for Honda Accord Sedan (2013-2015)
$162.95
Passer aux informations sur le produit
Black Halogen Projector LED DRL Headlights Pair for Honda Accord Sedan (2013-2015)
$162.95
DS-HO2502151-BK-LEDDRL
Free shipping to the lower 48 · Returns & refunds · Questions? Contact us
Fitment warning: Sedan 4-door with factory halogen headlights AND factory LED daytime running lights only. Not a coupe or a conversion for a different factory lighting configuration. Replaceable bulbs are not included.
Black Halogen Projector LED DRL Headlights Pair for Honda Accord Sedan (2013-2015). New driver and passenger replacement assemblies with clear lenses. Match the original housing and factory lighting equipment before ordering.
Fitment
| Years | Vehicle | Notes |
|---|---|---|
| 2013-2015 | Honda Accord | Sedan 4-door with factory halogen headlights AND factory LED daytime running lights only. Not a coupe or a conversion for a different factory lighting configuration. Replaceable bulbs are not included. |
Specs
- Sold as: driver and passenger pair
- Lighting: Halogen
- Low beam H11; high beam 9005; turn WY21W. LED DRL included; replaceable bulbs not included.
- DOT/SAE compliance stated in the product listing
Bulb sizes: H11 | 9005 | WY21W
In the Box
- Driver-side headlight assembly
- Passenger-side headlight assembly
- Integrated LED daytime running lights
Interchange References
HO2502151, HO2503151
Installation: Honda Accord Sedan (2013-2015)
Professional installation and beam aiming are recommended. Switch off the lights and ignition before servicing.
- For this Accord sedan, release the grille clips and the bumper screws and lower clips. Support the cover while disengaging the side locating pins and unplugging its attached wiring.
- With the bumper clear, remove the upper headlamp hardware and lower support-bracket fasteners. Support the lamp while releasing the wiring harness; compare the lower bracket with the replacement before transferring it.
- Fit the correct bulbs, connectors and lower bracket for this specific DRL configuration. Engage the locating points, secure the lamp and refit the bumper side pins and clips. Test the low/high beams, turn signals and DRL equipment as applicable, then check beam aim.
Frequently Asked Questions
Which factory lighting configuration is compatible?
Sedan 4-door with factory halogen headlights AND factory LED daytime running lights only. Not a coupe or a conversion for a different factory lighting configuration. Replaceable bulbs are not included.
Which bulbs are used and included?
Low beam H11; high beam 9005; turn WY21W. LED DRL included; replaceable bulbs not included.
What access is needed for installation?
The front bumper cover must be released; retain and transfer the lower support bracket for the original LED-DRL configuration. Professional installation and beam aiming are recommended.