Black Halogen Tail Lights Pair for Toyota Tacoma (2001-2004)

Refresh a 2001-2004 Tacoma with this black halogen tail light pair. Each housing is a stacked three-lens design: turn signal at the top, tail and brake in the center, and reverse at the bottom, in a black housing. Bulbs are included. The housings use the factory mounting points and factory-style connectors.

Fitment

Specs

• Sold as: a driver and passenger pair
• Style: black housing, three-lens stack (turn, tail/brake, reverse)
• Lighting: halogen; bulbs included
• DOT certified
• 12 V
• New aftermarket assemblies

In the Box

• Driver and passenger black halogen tail lights
• Bulbs

Interchange References

Replaces original-style 2001-2004 Tacoma tail lights commonly crossed with 81550-04060 and TO2801139.

Installation: Toyota Tacoma (2001-2004)

On the 2001-2004 Tacoma these tail lights mount to the bedside, with the fasteners reached from inside the bed. Professional installation is recommended. Switch off the lights and ignition, set the parking brake, and disconnect the negative battery cable before you start.

1. Open the tailgate. From inside the bed, locate the tail light fasteners on the back of the housing.
2. Unplug the factory connector.
3. Remove the retaining screws or nuts and pull the housing straight out of the bedside. Do not pry on the lens.
4. Set the new housing into the opening, start the fasteners by hand, then tighten them evenly. Plug the factory connector back in until it clicks.
5. Repeat on the other side. Reconnect the battery and check tail, brake, turn, and reverse functions before you drive.