Black HID Projector Headlights Pair for Chevrolet Malibu HID (2013-2015)
$263.95
Passer aux informations sur le produit
Black HID Projector Headlights Pair for Chevrolet Malibu HID (2013-2015)
$263.95
DS-23285541
Free shipping to the lower 48 · Returns & refunds · Questions? Contact us
Replace yellowed or damaged headlights on your 2013-2015 Chevy Malibu with factory HID with this brand-new pair of black HID/Xenon projector headlight assemblies. Half assembly: reuse your HID bulbs and ballasts.
Fitment
| Year | Make / Model | Fits |
|---|---|---|
| 2013-2015 | Chevrolet Malibu LTZ | Factory HID/Xenon headlights |
Will NOT fit: Malibu with factory halogen headlights (LS, LT, Eco, halogen LTZ); 2016+ Malibu.
Common Reasons to Replace
- Yellowed, hazy, or oxidized lenses reducing light output
- Cracked lens or broken mounting tabs
- Moisture or condensation inside the housing
- Collision damage
Specs
- Housing: Black
- Low beam: HID projector (bulb not included)
- Turn signal: WY21W
- Running/marker: W21/5W
- DOT compliant
- Quantity: Pair (Left + Right)
- Condition: New
Interchange Part Numbers
OEM: 23285541, 22738068, 22986200, 22738067, 22986199. Partslink: GM2502400, GM2503400.
What's Included
- 1 x Driver side headlight assembly
- 1 x Passenger side headlight assembly
- Half assembly: HID bulbs, ballasts, and high-voltage wires are NOT included; reuse yours
Installation
- Disconnect the battery, open the hood and remove the upper radiator/fascia cover fasteners.
- Raise the car, remove the front wheel and peel back the wheel-well liner.
- Remove the fascia-to-fender bolts and lower fasteners, then pull the bumper end away from the fender.
- Remove the headlight bolts, pull the lamp forward and unplug it.
- Transfer your HID bulb, ballast and high-voltage wires, test, refit the fascia and aim. Do not over-adjust the adjusters.
Steps compiled from Design News and HeadlightSize Malibu guides and ModifiedLife Malibu lighting notes. Professional installation and headlight aiming are recommended.
FAQs
What bulb sizes do these headlights use?
Per the listing image, the turn signal is WY21W and the running/marker light is W21/5W. The HID bulb, ballast and high-voltage wires are not included; reuse yours.
Will these fit a Malibu with halogen headlights?
No. They are for LTZ cars with factory HID only; halogen and HID Malibu lamps are not interchangeable without changing the wiring and ballasts.
Do I need to remove the front bumper to replace these headlights?
Usually yes for the full assembly: pull back the wheel-well liner, remove the fascia bolts, ease the bumper end off and remove the headlight bolts.
Can I install HID or LED kits?
Not applicable. These are HID housings; reuse your factory HID bulbs and ballasts.