Black HID Projector Headlights Pair w/ AFS & Angel Eyes for BMW X6 E71 (2008-2014)

Replace damaged or hazy headlights on your 2008-2014 BMW X6 (E71) with this brand-new pair of black HID/Xenon projector headlight assemblies with AFS and halo rings. Fits factory xenon AFS models.

Fitment

Will NOT fit: X6 M; X5 E70; 2015+ X6 F16.

Common Reasons to Replace

• Yellowed, hazy, or oxidized lenses reducing light output
• Cracked lens or broken mounting tabs
• Moisture or condensation inside the housing
• Collision damage

Specs

• Housing: Black
• Lens: Clear
• Low/high beam: HID projector (bulb not included)
• Halo rings and AFS
• DOT compliant
• Quantity: Pair (Left + Right)
• Condition: New

Interchange Part Numbers

OEM: 63117287017, 63117248003, 63117271375, 63117271376. Partslink: BM2518132, BM2519132.

What's Included

• 1 x Driver side headlight assembly
• 1 x Passenger side headlight assembly
• Half assembly: HID bulbs, ballasts, and high-voltage wires are NOT included; reuse yours

Installation

1. Remove the hood rubber strip and the four upper bumper bolts.
2. Remove the front wheel-well liners (about three screws each side) and the lower bumper screws.
3. Unplug parking sensors and fog lights, unclip the bumper side tabs at the fender gap and pull the bumper forward.
4. Remove the two upper black 8 mm headlight screws and the two rear silver 8 mm screws, unplug the harness, and lift the lamp out.
5. Transfer HID bulbs and ballasts, install in reverse (headlight-to-side-panel bolts 4 Nm), and aim the lights.

Steps compiled from Xoutpost/1Addicts forum write-ups and BMW E71 torque specs. Professional installation and headlight aiming are recommended.

FAQs

What bulbs do these headlights use?
Bulbs: the listing does not state headlight bulb sizes; reuse your factory bulbs. HID bulbs and ballasts move over from your old headlights.

Can I install LED or HID bulbs?
These are already HID housings.

Will these fit an X5?
No. The X5 E70 uses a different headlight.