GENSSI hero — black housing clear lens tail lights pair with bulbs Pontiac GTO (2004-2006) white background

Black Housing Clear Lens Tail Lights Pair w/ Bulbs for Pontiac GTO (2004-2006)

$267.95
Passer aux informations sur le produit
GENSSI hero — black housing clear lens tail lights pair with bulbs Pontiac GTO (2004-2006) white background

Black Housing Clear Lens Tail Lights Pair w/ Bulbs for Pontiac GTO (2004-2006)

$267.95
DS-GTO-TAIL-BLK-CLR-PAIR-2004-2006

Free shipping to the lower 48 · Returns & refunds · Questions? Contact us

The stock red lenses on a 2004-2006 GTO look dated—this Monaro-style set swaps in a black housing with a clear lens over a red diffuser for a dark, modern rear end that still lights red. GENSSI's GTO pair is a vehicle-specific replacement that ships with bulbs, sockets, and wiring so it connects to the factory harness without splicing.

Fitment

YEAR MAKE / MODEL FITS
2004-2006 Pontiac / GTO Yes

Specs

  • Style: Monaro style black housing with a clear lens over a red diffuser — correct red output when lit; polycarbonate lens with UV and impact protection
  • Bulbs: Incandescent. Bulbs, sockets, and wiring included (1157 parking / brake, 1156 signal, 1156 reverse)
  • Sold as: Black housing clear lens tail light pair (left + right) with bulbs, sockets, and wiring
  • Fit: Direct-fit black housing tails for 2004-2006 Pontiac GTO

Interchange

92146794, 92146793

What's included

  • 1x Driver black housing clear lens tail light
  • 1x Passenger black housing clear lens tail light
  • Bulbs, sockets, and wiring for both lamps

Installation — Pontiac GTO (2004-2006)

  1. Raise the trunk lid. The same two-screw procedure is used on the 2004, 2005, and 2006 GTO.
  2. Each lamp is held by two screws into the body. Remove those two screws. The single screw in the trunk floor trim is not a lamp screw.
  3. Pull the lamp sideways, toward the outside of the quarter, until the locating pegs on the side of the housing snap free of their clips. It does not come off by pulling straight back.
  4. Turn the sockets counterclockwise and pull them out. Move the bulbs you are keeping into the new housing, then lock each socket with a clockwise turn.
  5. Set the new lamp on the panel, align the pegs with the clips, and push it sideways until the pegs snap in. Install the two screws and tighten them to 2 N·m (18 lb-in).
  6. Repeat on the other side. Check tail, brake, turn, and reverse, then close the trunk.

Buyer FAQ

Will the lights still show red? Yes. The clear lens sits over a red diffuser, so the lamps light with the correct red output when you brake while looking sharp and dark by day.

Do I have to re-wire anything? No splicing. Bulbs, sockets, and wiring come with the lamps, so they are ready to connect to the factory harness.

Which GTOs fit, and what is in the box? The 2004-2006 Pontiac GTO. You get the driver and passenger lamps with bulbs, sockets, and wiring, matching OEM 92146794 on the left and 92146793 on the right.

Vous aimerez peut-être aussi