Black LED Projector Headlights Pair for Toyota Corolla Sedan (2014-2016)
$159.95
Passer aux informations sur le produit
Black LED Projector Headlights Pair for Toyota Corolla Sedan (2014-2016)
$159.95
DS-8115002E60
Free shipping to the lower 48 · Returns & refunds · Questions? Contact us
Fitment warning: These headlights fit the 2014-2016 Toyota Corolla sedan (L, LE, LE Eco, S, S Plus and Special Edition) with factory LED low-beam projector headlights. They will not fit the 2017-2019 facelifted Corolla, the 2009-2013 Corolla or the Corolla iM. The LED low beam is built in; the high beam and turn signal bulbs and sockets are not included, so reuse your factory ones.
Put a fresh face back on your 2014-2016 Corolla. This black pair replaces hazy, cracked or yellowed headlights with clear lenses, a built-in LED projector low beam and the original amber corner. Each lamp bolts to the factory mounts and plugs into the factory connectors, with no splicing.
Fitment
| Years | Vehicle | Notes |
|---|---|---|
| 2014-2016 | Toyota Corolla | Sedan (L, LE, LE Eco, S, S Plus, Special Edition) with factory LED low-beam projector headlights. Before the 2017 facelift. |
Specs
- Sold as: driver and passenger pair
- Housing: black, clear lens, amber corner
- Low beam: LED projector, built in
- High beam: halogen reflector (bulb not included)
- Turn signal and marker bulbs and sockets not included (reuse your factory ones)
- DOT compliant
- Plugs into the factory connectors (no splicing)
In the Box
- Driver-side LED projector headlight assembly
- Passenger-side LED projector headlight assembly
Interchange References
Replaces the original assemblies commonly crossed with 81150-02E60, 81110-02E60, TO2502216, TO2503216.
Installation: Toyota Corolla Sedan (2014-2016)
On the 2014-2016 Corolla the grille and front bumper cover come off to reach the headlight. Have spare bumper-corner retainers ready, since the plastic rivets can break. Turn the lights off before you start.
- Remove the grille fasteners and hidden clips, then the bumper pins behind the grille.
- Remove the lower shield, wheel-liner and corner fasteners, and disconnect the fog lights if fitted.
- Release both bumper corners and slide the cover forward with support. Remove the headlight's side bolt and two upper bolts, pull it forward and unplug the connectors.
- Move the high-beam and turn signal bulbs, sockets and the metal mounting clip to the new lamp, and lock the sockets in.
- Bolt the new lamp in, refit the bumper, liners and shields, seat the grille clips, test all lights and aim the beams.
Frequently Asked Questions
Which vehicles do these headlights fit?
2014-2016 Toyota Corolla sedans (L, LE, LE Eco, S, S Plus, Special Edition) with factory LED low-beam headlights. They do not fit 2017-2019, 2009-2013 or the Corolla iM. Compare your current lamps with our photos before ordering.
Is this a pair or a single lamp?
This is a complete driver and passenger pair, not a single-side lamp.
Are bulbs included?
The LED low beam is built in. The high beam and turn signal bulbs and sockets are not included, so move your factory ones over.
Do I need to cut or splice any wiring?
No. Each lamp plugs into the factory connectors.
How are they installed on a 2014-2016 Toyota Corolla?
Remove the grille and the front bumper cover, then the headlight's side bolt and two upper bolts. Move your bulbs, sockets and the metal mounting clip over and bolt in the new lamp.