Black Projector Headlights Pair w/ LED DRL for Chrysler 200 Halogen (2012-2014)
$306.95
Passer aux informations sur le produit
Black Projector Headlights Pair w/ LED DRL for Chrysler 200 Halogen (2012-2014)
$306.95
DS-68088067AG
Free shipping to the lower 48 · Returns & refunds · Questions? Contact us
Replace yellowed or damaged headlights on your 2012-2014 Chrysler 200 with this brand-new pair of black projector headlights with LED DRL, all bulbs included.
Fitment
| Year | Make / Model | Fits |
|---|---|---|
| 2012-2014 | Chrysler 200 sedan, convertible | Factory halogen headlights |
Will NOT fit: Chrysler 200 with factory HID; 2015+ 200; Sebring.
Common Reasons to Replace
- Yellowed, hazy, or oxidized lenses reducing light output
- Cracked lens or broken mounting tabs
- Moisture or condensation inside the housing
- Collision damage
Specs
- Housing: Black
- High/low beam: HIR2 (9012) (included)
- Turn signal: 3157A (included)
- Side marker: W5W/T10 (included)
- Running light: LED
- DOT compliant
- Quantity: Pair (Left + Right)
- Condition: New
Interchange Part Numbers
OEM: 68088067AG, 68088067AF, 68088066AF. Partslink: CH2502275, CH2503275.
What's Included
- 1 x Driver side headlight assembly
- 1 x Passenger side headlight assembly
- All bulbs installed: HIR2 (9012), 3157A, W5W
Installation
- Remove the upper grille/bumper screws and push clips under the hood.
- Remove the lower bumper bolts and clips and the fender-liner fasteners in each wheel well.
- Pull the bumper forward and unplug the fog lights.
- Remove the headlight mounting bolts, pull the lamp forward and unplug it.
- Install in reverse and aim. Note: bulbs alone can be swapped through the wheel well, but the full assembly needs the bumper off.
Steps compiled from 1A Auto 2011-2014 Chrysler 200 headlight video and owner DIY guides. Professional installation and headlight aiming are recommended.
FAQs
What bulb sizes do these headlights use?
High/low beam HIR2 (9012), turn 3157A, side marker W5W (T10), LED running light. All included.
Will these fit a 2015 200?
No. The 2015 redesign is different.
Do I need to remove the front bumper to replace these headlights?
For the full assembly, yes. Bulbs alone can be changed through the wheel-well access panel on the 2011-2014 200.
Will these fit a 2011 Chrysler 200?
The listing fitment chart shows 2012-2014; check that your original lamp matches before ordering for a 2011.
Can I install HID or LED kits?
Yes. The high/low beam uses an HIR2 (9012) halogen bulb, so a 9012 LED or HID kit can be used; aim afterward.