Black Projector Headlights Pair w/ LED DRL for Chrysler 300 Halogen (2012-2014)

Replace yellowed or damaged headlights on your 2012-2014 Chrysler 300 with this brand-new pair of black-bezel projector headlights with LED DRL, bulbs included.

Fitment

Will NOT fit: 300 with factory HID/Xenon; 300C/SRT8 with HID; 2015+ 300.

Common Reasons to Replace

• Yellowed, hazy, or oxidized lenses reducing light output
• Cracked lens or broken mounting tabs
• Moisture or condensation inside the housing
• Collision damage

Specs

• Housing: Black
• High/low beam: 9012 (included)
• Turn signal: PSY24W (included)
• DRL and side marker: LED
• DOT compliant
• Quantity: Pair (Left + Right)
• Condition: New

Interchange Part Numbers

OEM: 68085416AF, 68085416AB, 68085416AC, 68085416AD, 68085416AE. Partslink: CH2503235.

What's Included

• 1 x Driver side headlight assembly
• 1 x Passenger side headlight assembly
• 9012 and PSY24W bulbs installed

Installation

1. Raise and support the car; remove the front splash shields and belly pan.
2. Remove the fender-side fascia bolts (nine total) and the eight radiator-support push pins.
3. Unplug the fog lamp connectors, pull the fascia out of the fender brackets and remove it.
4. Remove the four headlamp screws (two upper, two lower), pull the lamp forward and unplug the rear connector.
5. Install in reverse and aim.

Steps compiled from the Mopar 2011-2014 LX service manual and 300CForums headlight thread. Professional installation and headlight aiming are recommended.

FAQs

What bulb sizes do these headlights use?
High/low beam 9012 and turn PSY24W, both included; DRL and side marker are LED.

Will these fit a 300 with HID?
No. Halogen cars only.

Do I need to remove the front bumper to replace these headlights?
Yes. The 2011-2014 300 fascia must be removed (splash shields, nine fender-side bolts, eight push pins); each lamp has four screws.

Will these fit a 2011 Chrysler 300?
The listing is for 2012-2014 halogen cars. Compare your connector and DRL style before ordering for a 2011.

Can I install HID or LED kits?
Yes. The high/low beam uses a 9012 halogen bulb, so a 9012 LED or HID kit can be used; aim afterward.