Black Quad Halogen Headlights Pair for Dodge Ram 1500 2500 3500 (2009-2018)
Free shipping to the lower 48 · Returns & refunds · Questions? Contact us
Replace yellowed, cracked, or foggy factory quad headlights on your 2009-2018 Ram 1500 2500 3500 with this new black-housing halogen pair (driver + passenger). These are the four-bulb "quad" reflector style lamps with separate low and high beams and a clear corner turn signal. Bulbs are not included — reuse your factory bulbs or install new ones.
Fitment
| Year | Make / Model | Fits |
|---|---|---|
| 2009-2018 | Dodge / Ram 1500 (4th gen DS) | Trucks with factory quad halogen headlights |
| 2010-2018 | Dodge / Ram 2500, 3500 | Trucks with factory quad halogen headlights |
Will NOT fit: trucks with the single-bulb (dual) H13 headlight, factory projector or LED headlights, or the 2019+ new-body Ram 1500. Check your low beam: quad trucks use an H11 low beam and a 9005 high beam.
Common Reasons to Replace
- Yellowed or hazy lenses cutting light output
- Cracked lens or broken mounting tabs
- Moisture or condensation inside the housing
- Collision damage, or updating chrome lamps to a black look
Specs
- Light type: Halogen, quad reflector (separate low + high beam)
- Housing: Black, clear lens
- Bulbs: Low beam H11, high beam 9005, turn signal 3157 (bulbs NOT included)
- Lens: Polycarbonate; housing: polypropylene
- DOT & SAE compliant
- Fitment type: Direct replacement, plug-and-play connectors
- Quantity: Pair (Left + Right)
- Condition: New
Interchange Part Numbers
OEM: 68001485AG, 55277409AF · Partslink: CH2519135
What's Included
- 1 x Driver-side headlight assembly
- 1 x Passenger-side headlight assembly
- Bulbs not included
Installation (2009-2018 Ram 1500 / 2010-2018 Ram 2500-3500 Quad Headlights)
Tools: trim/panel popper, 10 mm socket with 3 in extension, 8 mm or 10 mm socket for grille bolts (varies by grille), ratchet. Tape the top of the bumper so the grille does not scratch it.
- Park, set the parking brake, and open the hood.
- Pop the plastic push pins along the radiator cover (4–6 depending on truck) and lift the cover off.
- Remove the 4 bolts across the top of the grille. Hold the grille and pull it straight forward (not up) to release the lower clips.
- In the front wheel well, open the small access door behind the headlight. Push up the white retaining latch to unlock the back of the lamp.
- Remove the two 10 mm headlight bolts (upper and lower).
- Pull the lamp forward to pop it off the rear ball socket. Twist out the 3157 turn signal socket (counterclockwise), slide back the gray lock on the headlight plug, press the tab, and unplug.
- Remove the dust caps on the old lamp and transfer the H11 low and 9005 high beam bulbs (turn counterclockwise) to the new housing. Do not touch the glass. Reinstall the caps fully sealed.
- Plug in the headlight connector and lock the gray slide, then install the turn signal socket (check its gasket).
- Line up the ball socket and guide pin, press the lamp in, reinstall the two 10 mm bolts, then pull the wheel-well latch down to lock it. Close the access door.
- Repeat on the passenger side, reinstall the grille and radiator cover pins, then check low, high, and turn signals and aim the beams against a wall.
FAQ
How do I tell if my Ram has quad or dual headlights?
Look through the lens: quad lamps have two separate reflector bowls (H11 low + 9005 high). Dual lamps have one larger bowl with a single H13 bulb. This pair is for quad trucks only.
Do I have to remove the grille to change the headlight?
Most install guides remove the grille to reach the bolts. Some owners reach the lower bolt with a long extension and leave the grille on, but pulling the grille is easier and avoids broken clips.
Will these fit my truck if it came with factory projector headlights?
No. Factory projector trucks use a different housing and connectors. This pair replaces the halogen quad reflector lamps only.
What bulb sizes do these use?
Low beam H11, high beam 9005, turn signal 3157. Bulbs are not included.
Can I put LED or HID bulbs in these?
Yes. These are halogen housings, so H11/9005 LED or HID kits fit. Use a quality kit with a CANbus decoder if you see flicker or a bulb-out warning, and re-aim after install.