Black Trim HID Headlights Pair w/ LED DRL for Chrysler 200 (2015-2017)

Replace yellowed or cracked HID headlights on your 2015-2017 Chrysler 200 with this brand-new black-trim HID pair with LED running lights. Reuse your factory D3S bulbs and ballasts.

Fitment

Will NOT fit: Halogen cars.

Common Reasons to Replace

• Yellowed, hazy, or oxidized lenses reducing light output
• Cracked lens or broken mounting tabs
• Moisture or condensation inside the housing
• Collision damage

Specs

• Low beam: D3S HID (not included)
• Turn: PWY24W
• Running light: built-in LED
• Trim: Black
• DOT compliant
• Quantity: Pair (Left + Right)
• Condition: New

Interchange Part Numbers

OEM: 68285847AA, 68145683AE. Partslink: CH2503263, CH2502263.

What's Included

• 1 x Driver side headlight assembly
• 1 x Passenger side headlight assembly
• Left and right headlights
• HID bulbs and ballasts are NOT included; reuse your factory ones

Installation

1. Disconnect the negative battery cable. Remove the under-hood upper close-out panel clips and the six bolts along the top of the fascia.
2. Remove the belly pan and lower close-out bolts, then the three splash-shield bolts and the corner bolt in each wheel well.
3. Pull the fascia corners out of the fender clips, release it from the brackets under the headlights, pull it forward and unplug the harness.
4. Remove the headlamp bolts, unplug the lamp, install the new one, refit the fascia and aim the headlights.

Steps compiled from 200Forums "How to remove from bumper cover" thread, Remont-bampera Chrysler 200 2015-2017 guide. Professional installation and headlight aiming are recommended.

FAQs

What bulbs do these use?
D3S HID and PWY24W turn per the listing.

Will these fit a halogen 200?
No. Factory HID cars only.

Do I need to remove the front bumper to replace these headlights?
Yes. On the 2015-2017 Chrysler 200 the front fascia comes off (top bolts under the close-out panel, lower bolts, wheel-well bolts) to reach the headlamp bolts.

Can I install HID or LED kits?
Not applicable. These are factory-style HID/Xenon housings; reuse your factory HID bulbs and ballasts.