Chrome Full LED Headlights Pair w/ Module for Infiniti QX60 (2019-2020)

Replace cracked or hazy headlights on your 2019-2020 QX60 with this brand-new chrome full LED pair with LED module (for models without leveling motor/AFS).

Fitment

Will NOT fit: AFS/adaptive (motor) models; 2014-2018 QX60; 2022+ QX60.

Common Reasons to Replace

• Yellowed, hazy, or oxidized lenses reducing light output
• Cracked lens or broken mounting tabs
• Moisture or condensation inside the housing
• Collision damage

Specs

• Low/high beam, DRL, turn: built-in LED
• LED module: included
• Leveling/AFS motor: No
• DOT compliant
• Quantity: Pair (Left + Right)
• Condition: New

Interchange Part Numbers

OEM: 260609NR0B, 260109NR0B. Partslink: IN2503185, IN2502185.

What's Included

• 1 x Driver side headlight assembly
• 1 x Passenger side headlight assembly
• LED module included

Installation

1. Raise the front, remove the lower bumper screws and clips along the undertray, then the three side screws per side and the 10 mm bolt at each bumper corner.
2. Open the hood, remove the top clips/radiator cover and the upper bumper-to-fender screws, unplug the fog lights, sensors and camera, and pull the fascia off with a helper.
3. Remove the four M6 headlamp bolts, pull the lamp forward and disconnect its three connectors.
4. Infiniti bulletin ITB19-014: remove the locating bracket (T10) from the new lamp if it interferes, and tape the fender edge to protect the paint.
5. Connect and test the new lamp, reinstall the fascia and aim the headlights.

Steps compiled from How It's Fixed "2016-2020 Infiniti QX60 Front Bumper Removal" video; Infiniti Technical Bulletin ITB19-014 (headlamp replacement). Professional installation and headlight aiming are recommended.

FAQs

Will these fit a QX60 with adaptive (AFS) headlights?
No. For models without the AFS motor.

Will these fit a 2018 QX60?
Match your factory lamp; this listing is for 2019-2020.

Do I need to remove the front bumper to replace these headlights?
Yes. The front fascia has to come off to reach the four headlamp bolts.

Can I install HID or LED kits?
Not applicable. The low and high beams are built-in factory LED; there is no replaceable headlight bulb for an LED or HID kit.