Chrome Halogen Headlights Pair for Ford Escape (2013-2016)
$226.95
Passer aux informations sur le produit
Chrome Halogen Headlights Pair for Ford Escape (2013-2016)
$226.95
DS-CJ5Z13008D
Free shipping to the lower 48 · Returns & refunds · Questions? Contact us
Replace yellowed, cracked or foggy headlights on your 2013-2016 Ford Escape with this brand-new pair of chrome halogen headlight assemblies, bulbs included.
Fitment
| Year | Make / Model | Fits |
|---|---|---|
| 2013-2016 | Ford Escape S, SE, Titanium (halogen) | Factory halogen headlights |
Will NOT fit: Escape with factory HID/Xenon; 2017-2019 facelift Escape; 2008-2012 Escape.
Common Reasons to Replace
- Yellowed, hazy, or oxidized lenses reducing light output
- Cracked lens or broken mounting tabs
- Moisture or condensation inside the housing
- Collision damage
Specs
- Housing: Chrome
- Lens: Clear
- Corner: amber
- Bulbs: included (size not stated in listing)
- DOT compliant
- Quantity: Pair (Left + Right)
- Condition: New
Interchange Part Numbers
OEM: CJ5Z13008D, FO2502309, FO2503309. Partslink: PTH128264P01.
What's Included
- 1 x Driver side headlight assembly
- 1 x Passenger side headlight assembly
- Headlight bulbs installed
Installation
- Open the hood, remove the upper bumper/radiator cover fasteners, and the wheel-well liner fasteners at each bumper corner.
- Remove the lower bumper fasteners, unplug the fog lights and pull the bumper cover off.
- Remove the two upper front/inboard bolts, the rear bolt and the lower bolt from the headlamp.
- Pull the lamp forward, unplug it and install the new one, tightening the bolts to about 5 Nm.
- Refit the bumper cover and aim the headlights.
Steps compiled from the Ford Escape 2012-2015 exterior lighting removal procedure (Diagnostdata), Go-Parts and FordEscape.org. Professional installation and headlight aiming are recommended.
FAQs
What bulb sizes do these headlights use?
Bulbs are included; the listing does not state the headlight bulb size, so match your factory bulb size if you ever replace them.
Do I need to remove the front bumper to replace these headlights?
For the full assembly, yes: remove the front bumper cover, then the four retaining bolts (two at the top front/inboard, one at the rear, one lower). Bulb-only changes can be done from under the hood.
Will these fit a 2017 Escape?
No. The 2017 facelift uses a different headlight shape.
Can I install HID or LED kits?
Yes. This is a halogen housing, so a plug-in LED or HID kit in your factory bulb size can be used. Aim afterward.