Chrome Halogen Headlights Pair for Ford Focus (2012-2014)
Free shipping to the lower 48 · Returns & refunds · Questions? Contact us
Replace yellowed or cracked headlights on your 2012-2014 Ford Focus with factory halogen headlights with this new chrome pair. Bulbs are not included; reuse your factory bulbs.
Fitment
| Year | Make / Model | Fits |
|---|---|---|
| 2012-2014 | Ford Focus sedan / hatchback with factory halogen headlights | Factory halogen headlights |
Will NOT fit: Focus with factory HID; 2015-2018 Focus (see our versions); Focus ST/RS; 2008-2011 Focus.
Common Reasons to Replace
- Yellowed, hazy, or oxidized lenses reducing light output
- Cracked lens or broken mounting tabs
- Moisture or condensation inside the housing
- Collision damage
Specs
- Type: Halogen
- Bulbs: not included; match your factory bulbs (reuse them if needed)
- Housing: Chrome
- DOT compliant
- Quantity: Pair (Left + Right)
- Condition: New
Interchange Part Numbers
OEM: BM5Z13008F, BM5Z-13008-B, CV6Z-13008-B, BM5Z-13008-A, CV6Z-13008-A. Partslink: FO2502298, FO2503298.
What's Included
- 1 x Driver side headlight assembly
- 1 x Passenger side headlight assembly
- Left and right headlights
- Bulbs not included (reuse your factory bulbs)
Installation
- Disconnect the battery and open the hood.
- Remove the T30 Torx bolts holding the headlamp (one at the grille side and one at the fender side). If needed, remove the wheel-arch screws and loosen the bumper corner for clearance.
- Pull the lamp forward and unplug the connector.
- Move your factory bulbs into the new lamp (bulbs not included per the listing), refit the T30 bolts and any bumper fasteners, and aim the headlights.
Steps compiled from Scegliauto Ford Focus Mk3 headlight video; carsparefinder Mk3 Focus headlamp guide. Professional installation and headlight aiming are recommended.
FAQs
Will these fit a car with factory HID?
No. Per the listing they are not compatible with factory HID headlights.
Will these fit a 2015 Focus?
No. The 2015 refresh uses a different headlight.
Do I need to remove the front bumper to replace these headlights?
Usually no. The lamp is held by T30 bolts; you may need to loosen the bumper corner for clearance.
What bulb sizes do these use?
The listing images do not state the bulb sizes. Bulbs are included; match your factory bulb sizes if you ever replace them.
Can I install LED or HID kits?
Yes. This is a halogen housing, so a plug-in LED or HID kit in your factory bulb size can be used. Aim the headlights afterward.