Chrome Halogen Headlights Pair for GMC Sierra 1500 (2007-2013) / 2500 HD 3500 HD (2007-2014)
$99.95
Passer aux informations sur le produit
Chrome Halogen Headlights Pair for GMC Sierra 1500 (2007-2013) / 2500 HD 3500 HD (2007-2014)
$99.95
DS-GM2502283-CH
Free shipping to the lower 48 · Returns & refunds · Questions? Contact us
Fitment warning: Bulbs AND wiring harness are not included. Confirm the original housing and connectors match before ordering.
Chrome Halogen Headlights Pair for GMC Sierra 1500 (2007-2013) / 2500 HD 3500 HD (2007-2014). New driver and passenger replacement assemblies with clear lenses. Match the original housing and factory lighting equipment before ordering.
Fitment
| Years | Vehicle | Notes |
|---|---|---|
| 2007-2014 | GMC Sierra 2500 HD | Bulbs AND wiring harness are not included. Confirm the original housing and connectors match before ordering. |
| 2007-2014 | GMC Sierra 3500 HD | Bulbs AND wiring harness are not included. Confirm the original housing and connectors match before ordering. |
| 2007-2013 | GMC Sierra 1500 | Bulbs AND wiring harness are not included. Confirm the original housing and connectors match before ordering. |
Specs
- Sold as: driver and passenger pair
- Lighting: Halogen
- Low beam H11; high beam HB3/9005. Bulbs and wiring harness are not included.
- DOT/SAE compliance stated in the product listing
In the Box
- Driver-side headlight assembly
- Passenger-side headlight assembly
Interchange References
GM2502283
Installation: GMC Sierra 1500 (2007-2013) / 2500 HD 3500 HD (2007-2014)
Professional installation and beam aiming are recommended. Switch off the lights and ignition before servicing.
- Remove the upper radiator-cover push pins. Release the two 7 mm screws in the grille-side trim panel and pull the panel outward to expose the recessed lamp fastener.
- Remove the recessed 10 mm bolt and the two upper 10 mm headlamp bolts. Tilt and slide the assembly out from behind the grille, then release the connector lock and disconnect the harness.
- Transfer compatible H11 low-beam and 9005 high-beam bulbs, sockets and the required original wiring harness. Engage the housing clip behind the grille, secure all three bolts, refit the trim and cover, then test and aim the lamps.
Frequently Asked Questions
Which factory lighting configuration is compatible?
Bulbs AND wiring harness are not included. Confirm the original housing and connectors match before ordering.
Which bulbs are used and included?
Low beam H11; high beam HB3/9005. Bulbs and wiring harness are not included.
What access is needed for installation?
The small grille-side panel is removed to reach a recessed third bolt; the housing slides behind a grille-side clip. Professional installation and beam aiming are recommended.