Chrome Halogen Headlights Pair for Toyota Tundra (2007-2013) Sequoia (2008-2017)

New chrome halogen headlights, sold as a driver-side and passenger-side pair for the 2007-2013 Toyota Tundra and 2008-2017 Sequoia application listed below.

Fitment

Specs

• Condition: New
• Sold as: Left and right pair
• Style: Chrome
• Lighting type: Halogen
• Bulb application: H11 low beam; 9005 high beam; WY21/5W signal; W5W side marker
• Bulbs not included

Shop by bulb size: H11 | 9005

In the Box

• 1 driver-side headlight assembly
• 1 passenger-side headlight assembly

Interchange References

811500C051, 811100C051, 811500C050, 811100C050

Installation: 2007-2013 Toyota Tundra and 2008-2017 Sequoia

Professional installation and beam aiming are recommended.

1. Open the hood, remove the two push clips holding the trim panel above the lamp and pry the panel away with a plastic trim tool.
2. Remove the three headlight bolts (two on top and one below), lift the assembly and disconnect its wiring.
3. Fit compatible H11 low-beam, 9005 high-beam, WY21/5W-type signal and W5W marker bulbs. Reconnect the wiring, reinstall the fine-thread lower bolt and the two coarse-thread upper bolts, refit the trim panel and clips, then test and aim.

Frequently Asked Questions

What should I check before ordering?
Fits 2007-2013 Toyota Tundra and 2008-2017 Toyota Sequoia. Does not fit 2009-2012 Tundra with a headlight level adjuster or 2012 Sequoia with headlight washers; vehicles with headlight leveling will lose that function with these headlights. Bulbs are not included.

Are bulbs included?
No. This package contains the headlight assemblies only; bulbs are not included.

What access is needed to replace the assemblies?
Open the hood, remove the two push clips holding the trim panel above the lamp and pry the panel away with a plastic trim tool.