Chrome Halogen Projector Headlights Pair w/ LED DRL & Bulbs for GMC Yukon / Yukon XL SLE SLT (2015-2017)

Replace yellowed or cracked headlights on your 2015-2017 GMC Yukon or Yukon XL SLE/SLT with this brand-new pair of chrome halogen projector headlights with LED DRL, bulbs included.

Fitment

Will NOT fit: Yukon Denali (HID, D3S); 2018+ Yukon unless your lamp matches; Chevrolet Tahoe/Suburban.

Common Reasons to Replace

• Yellowed, hazy, or oxidized lenses reducing light output
• Cracked lens or broken mounting tabs
• Moisture or condensation inside the housing
• Collision damage

Specs

• Housing: Chrome
• Low beam: H11 halogen
• DRL: LED
• DOT compliant
• Quantity: Pair (Left + Right)
• Condition: New

Interchange Part Numbers

OEM: 84155709, 23217057, 23240252, 23244332, 23288540, 23342009, 23355856, 23387147, 23445461, 23490011, 23217058, 23240253, 23244333, 23288541, 23342010, 23355857, 23387148, 23445462, 23490012. Partslink: GM2502409, GM2503409.

What's Included

• 1 x Driver side headlight assembly
• 1 x Passenger side headlight assembly
• Bulbs included

Installation

1. Disconnect the battery. Remove the plastic clips holding the radiator shroud and lift it off.
2. Remove the six 10 mm grille bolts and the upper bumper bolts, then pull the grille/bumper forward enough to reach the headlamp (unplug the fogs if the bumper comes off).
3. Remove the two upper and two lower headlamp bolts and pull the lamp straight forward. Unplug it.
4. Plug in and bolt in the new lamp, refit the grille, shroud and clips, and aim the headlights.

Steps compiled from T-Rex 2015 Yukon grille instructions and Tahoe Yukon Forum headlight-removal threads. Professional installation and headlight aiming are recommended.

FAQs

What bulb sizes do these headlights use?
Per the listing match image, the low beam is H11 halogen. Other bulb sizes are not stated; match your factory bulbs.

Will these fit a Yukon Denali?
No. Per the listing, 2015-2020 Denali trucks use D3S HID bulbs with a ballast and do not match. These fit halogen SLE/SLT.

Do I need to remove the front bumper to replace these headlights?
Usually the grille and upper bumper fasteners have to come off: radiator shroud clips, six 10 mm grille bolts and the upper bumper bolts, then four headlamp bolts (two on top, two behind the grille).

Can I install HID or LED kits?
Yes. This is a halogen housing, so a plug-in LED or HID kit in your factory bulb size can be used. Aim the headlights afterward.