Chrome Halogen Projector Headlights Pair w/ LED DRL for Ford Fusion (2017-2020)
Free shipping to the lower 48 · Returns & refunds · Questions? Contact us
Replace hazy or damaged headlights on your 2017-2020 Ford Fusion with this new chrome halogen pair with LED DRL. H11 low and H9 high bulbs included per the listing.
Fitment
| Year | Make / Model | Fits |
|---|---|---|
| 2017-2020 | Ford Fusion with factory halogen headlights with LED DRL (SE trim, 7-pin connector per listing photo) | Factory halogen headlights |
Will NOT fit: Fusion without LED DRL (S trim); Fusion with LED headlights; 2013-2016 Fusion.
Common Reasons to Replace
- Yellowed, hazy, or oxidized lenses reducing light output
- Cracked lens or broken mounting tabs
- Moisture or condensation inside the housing
- Collision damage
Specs
- Low beam: H11 (per listing)
- High beam: H9 (per listing)
- DRL: LED
- Housing: Chrome
- DOT compliant
- Quantity: Pair (Left + Right)
- Condition: New
Interchange Part Numbers
OEM: HS7Z13008G. Partslink: FO2503350, FO2502350.
What's Included
- 1 x Driver side headlight assembly
- 1 x Passenger side headlight assembly
- Left and right headlights
- Bulbs (per listing)
Installation
- Remove the upper radiator cover push clips and the 7 mm bolts along the bottom of the bumper cover.
- Remove the front wheels, the fender-liner push clips and 10 mm nuts, and the 7 mm corner bolts; remove the 10 mm bolts across the center and unplug the bumper harness.
- Pull the bumper cover off, unplug the headlamp and remove its Torx (T25/T27) and two 10 mm bolts.
- Install the new lamps, test every function before refitting the bumper, then reassemble and aim.
Steps compiled from the 1A Auto 2013-2020 Ford Fusion headlight video, the Go-Parts 2013-2020 Fusion headlight guide and the Ford Performance M-17750-A bumper sheet. Professional installation and headlight aiming are recommended.
FAQs
Will these fit a Fusion without LED DRL?
No. The listing photo shows the LED-DRL lamp (7-pin) fits SE trim; the non-DRL S lamp is not a match.
What bulbs do these use?
H11 low and H9 high, per the listing, included.
Can I install LED or HID kits?
Yes. This is a halogen housing, so a plug-in LED or HID kit in your factory bulb size can be used. Aim the headlights afterward. Listing-backed sizes: H11 low, H9 high.
Do I need to remove the front bumper to replace these headlights?
Yes. The bumper cover comes off to reach the lower headlamp bolts.