Chrome HID Headlights Pair with AFS for Buick LaCrosse (2014-2016)

Chrome HID Headlights Pair with AFS for Buick LaCrosse (2014-2016)

$1,046.95
Passer aux informations sur le produit
Chrome HID Headlights Pair with AFS for Buick LaCrosse (2014-2016)

Chrome HID Headlights Pair with AFS for Buick LaCrosse (2014-2016)

$1,046.95
DS-26672545

Free shipping to the lower 48 · Returns & refunds · Questions? Contact us

Fitment warning: These headlights fit 2014-2016 Buick LaCrosse models with factory HID lamps and AFS that use the 12-pin connector only. They will not fit 8-pin housings or factory halogen lamps. HID bulbs, ballast, and high-voltage wires are not included — reuse your originals. Confirm your connector and lamps match these photos before ordering.

Replace faded or cracked factory HID AFS lamps on your 2014-2016 Buick LaCrosse with this chrome-projector pair. The housings bolt to the factory points and plug into the factory 12-pin connectors, with no splicing. Transfer your original HID bulbs, ballast, and high-voltage wires.

Important Fitment Note: Fits 2014-2016 Buick LaCrosse factory HID headlights with AFS and a 12-pin connector only. Not 8-pin. Not halogen. Bulbs, ballast, and high-voltage wires are not included.

Fitment

YEAR MAKE / MODEL FITS
2014-2016 Buick LaCrosse Factory HID with AFS, 12-pin connector only. Not 8-pin. Not halogen.

Specs

  • Sold as: driver and passenger pair (two lamps)
  • Housing: chrome projector, clear lens, AFS
  • HID low beam: D3S (bulbs, ballast, and high-voltage wires not included; reuse your originals)
  • Connector: 12-pin (8-pin housings do not match)
  • AFS: yes
  • DOT and SAE compliant
  • Plugs into the factory 12-pin connectors (no splicing)

Interchange

Replaces / cross-references: 26672545, 26672546, GM2502404, GM2503404, 26200186, 26264990, 26200185, 26264991

What's included

  • 1x driver side (left) HID AFS headlight housing (26672545)
  • 1x passenger side (right) HID AFS headlight housing (26672546)
  • D3S HID bulbs, ballast, and high-voltage wires are not included — reuse your originals

Installation — 2014-2016 Buick LaCrosse

Tools: socket set, screwdrivers, plastic trim tools, and a helper for the bumper cover. Estimated time: about 1.5 to 3 hours.

  1. Park on level ground, open the hood, turn the lights and ignition off, and disconnect the negative battery cable. On the 2014-2016 LaCrosse the front bumper cover typically comes off so you can reach the headlight bolts.
  2. Remove the fasteners across the top of the bumper and grille, the screws in each front wheel well, and the bolts along the lower edge, then release each bumper corner from the fender.
  3. With a helper, ease the cover forward, unplug any fog-lamp or similar connectors, and set the cover on a soft surface.
  4. Unplug the 12-pin headlight connector and the ballast and high-voltage connections, remove the mounting bolts, and lift each lamp out. Leave the factory ballast, D3S bulb, and high-voltage wires with the vehicle so you can transfer them.
  5. Transfer your original D3S bulb, ballast, and high-voltage wires to the new housing, set the lamp in place, install the bolts, and reconnect the factory 12-pin connector. Repeat on the other side.
  6. Refit the bumper cover and all fasteners, reconnect the battery, test the HID beams, AFS function if equipped, and turn signals, then aim the beams on a level surface.

Buyer FAQ

Will these fit a 2014-2016 Buick LaCrosse if my current headlights use an 8-pin connector, or if they are halogen? No. These are HID housings with AFS for 2014-2016 LaCrosse models whose lamps use the 12-pin connector. They will not fit 8-pin housings or factory halogen lamps. Compare your connector and lamps with the photos before ordering.

Are the HID bulbs, ballast, and high-voltage wires included? No. Reuse your original D3S HID bulbs, ballast, and high-voltage wires. The high-beam bulb size is not listed because it is not clearly documented on this product.

Do they plug into the factory 12-pin connectors? Yes. They bolt to the factory points and plug into the factory 12-pin connectors, with no splicing. Replaces 26672545, 26672546, GM2502404, and GM2503404.

Vous aimerez peut-être aussi