Chrome HID Projector Headlights Pair w/ Auto Leveling for Jeep Grand Cherokee (2014-2016)
Free shipping to the lower 48 · Returns & refunds · Questions? Contact us
Replace yellowed, cracked or foggy headlights on your 2014-2016 Jeep Grand Cherokee with factory HID and auto leveling with this brand-new pair of chrome HID/Xenon projector headlights. Half assembly: reuse your bulbs, ballasts and high-voltage wires.
Fitment
| Year | Make / Model | Fits |
|---|---|---|
| 2014-2016 | Jeep Grand Cherokee (WK2) with factory HID | Factory HID/Xenon headlights with auto leveling |
Will NOT fit: Halogen Grand Cherokee; 2011-2013 pre-facelift; 2017+ (different lamp); SRT/Trackhawk unless your lamp matches.
Common Reasons to Replace
- Yellowed, hazy, or oxidized lenses reducing light output
- Cracked lens or broken mounting tabs
- Moisture or condensation inside the housing
- Collision damage
Specs
- Housing: Chrome
- Low/high beam: HID projector (bulb NOT included)
- Auto leveling: Yes
- Side marker: amber
- DOT compliant
- Quantity: Pair (Left + Right)
- Condition: New
Interchange Part Numbers
OEM: 68111001AM, 68111000AD, 68111000AE, 68111000AF, 68111000AG, 68111000AH, 68111000AK, 68111000AL, 68111001AD, 68111001AE, 68111001AF, 68111001AG, 68111001AH, 68111001AI, 68111001AK, 68111001AL. Partslink: CH2502252, CH2503252.
What's Included
- 1 x Driver side headlight assembly
- 1 x Passenger side headlight assembly
- Half assembly: HID bulbs, ballasts, and high-voltage wires are NOT included; reuse yours
Installation
- Disconnect the battery. From underneath, remove the push clips across the center of the lower fascia and the wheel-liner clips and rivets.
- At each corner remove the 10 mm bolt where the fascia meets the fender, then pull the fascia sides away and unplug the fog lights and parking-sensor harness.
- Remove the two upper push clips and slide the fascia off.
- Remove the upper trim panel, then the 10 mm headlamp bolts. Unplug the harness and the leveling connector and pull the lamp forward.
- Transfer your HID bulbs, ballasts and wires, plug in, bolt the new lamp in, refit the fascia and aim the headlights.
Steps compiled from 1A Auto 2011-2021 Grand Cherokee headlight video and the FCA 2014-2016 WK2 fascia/headlamp removal procedure. Professional installation and headlight aiming are recommended.
FAQs
What bulbs do these headlights use?
The listing does not state the bulb size. This is a half assembly: per the listing, move over your HID bulbs, ballasts and high-voltage wires.
Do I need to remove the front bumper to replace these headlights?
Yes. On the 2014-2016 WK2 the front fascia comes off: lower push clips, wheel-liner rivets, the 10 mm bolt at each fender corner and the top clips. Unplug the fog lights and parking sensors, then unbolt the headlamp.
Will 2011-2013 Grand Cherokee headlights fit?
No. The 2014 facelift changed the headlight shape and mounting.
Can I install HID or LED kits?
Not applicable. These are factory-style HID/Xenon housings; reuse your factory HID bulbs and ballasts.