Chrome HID Projector Headlights Pair w/ Ballast, Bulbs & LED DRL for GMC Yukon / Yukon XL (2015-2020)

Replace yellowed or cracked HID headlights on your 2015-2020 GMC Yukon or Yukon XL with this brand-new pair of chrome HID projector headlights with LED light bars, ballasts and D3S bulbs included.

Fitment

Will NOT fit: Halogen Yukon SLE/SLT (H11 low beam); Chevrolet Tahoe/Suburban.

Common Reasons to Replace

• Yellowed, hazy, or oxidized lenses reducing light output
• Cracked lens or broken mounting tabs
• Moisture or condensation inside the housing
• Collision damage

Specs

• Housing: Chrome
• Low beam: D3S HID (included)
• Ballast: included
• DRL: LED
• DOT compliant
• Quantity: Pair (Left + Right)
• Condition: New

Interchange Part Numbers

OEM: 84294010, 23217056, 23240251, 23244331, 23288539, 23342008, 23355855, 23387146, 23445460, 23490010, 84155708, 84179566, 84564096, 23217055, 23240250, 23244330, 23288538, 23342007, 23355854, 23387145, 23445459, 23490009, 84155707, 84179565, 84294009. Partslink: GM2503414, GM2502414.

What's Included

• 1 x Driver side headlight assembly
• 1 x Passenger side headlight assembly
• D3S bulbs and ballasts included

Installation

1. Disconnect the battery. Remove the plastic clips holding the radiator shroud and lift it off.
2. Remove the 10 mm grille bolts and the upper bumper bolts, then pull the grille/bumper forward enough to reach the headlamp (unplug the fogs if the bumper comes off).
3. Remove the two upper and two lower headlamp bolts and pull the lamp straight forward. Unplug it.
4. Plug in and bolt in the new lamp, refit the grille, shroud and clips, and aim the headlights.

Steps compiled from Tahoe Yukon Forum and GM-Trucks.com headlight-removal threads, T-Rex K2 grille instructions. Professional installation and headlight aiming are recommended.

FAQs

What bulbs do these headlights use?
Per the listing match image the low beam is a D3S HID bulb, and the ballast is included. Other bulb sizes are not stated; match your factory bulbs.

Will these fit a halogen Yukon SLE/SLT?
No. Per the listing, trucks with an H11 halogen low beam do not match; these are for HID (D3S) trucks.

Do I need to remove the front bumper to replace these headlights?
Usually the grille and upper bumper fasteners have to come off (radiator shroud clips, 10 mm grille bolts and upper bumper bolts), then four headlamp bolts: two on top and two behind the grille.

Can I install HID or LED kits?
Not applicable. These are factory-style HID/Xenon housings; reuse your factory HID bulbs and ballasts.