Chrome Projector Halogen Headlights Pair for Nissan Altima Sedan (2013-2015)
$134.95
Passer aux informations sur le produit
Chrome Projector Halogen Headlights Pair for Nissan Altima Sedan (2013-2015)
$134.95
DS-260603TA0A
Free shipping to the lower 48 · Returns & refunds · Questions? Contact us
Fitment warning: Fits 2013-2015 Altima 4-door sedans with factory halogen headlights only. Not compatible with factory HID/Xenon headlights. Bulbs are not included.
New chrome projector Halogen headlights, sold as a driver-side and passenger-side pair for the listed Nissan Altima Sedan application.
Fitment
| Years | Vehicle | Notes |
|---|---|---|
| 2013-2015 | Nissan Altima Sedan | 4-door sedan; factory halogen only; excludes HID/Xenon |
Specs
- Condition: New
- Sold as: Left and right headlight pair
- Style: Chrome Projector
- Lighting type: Halogen
- Bulb application: H11 low beam; H9 high beam
- Bulbs not included
In the Box
- 1 driver-side headlight assembly
- 1 passenger-side headlight assembly
Interchange References
260603TA0A, 260103TA0A, NI2502208, NI2503208
Installation: 2013-2015 Nissan Altima Sedan
Professional installation and beam aiming are recommended.
- Release the forward radiator-cover push pins and the lower bumper-cover plate fasteners. Pull the wheel-liner edges aside to reach the corner bolt-and-nut attachments, then support the bumper while separating its fender-side retainers.
- Remove the two lower/side headlamp mounting bolts and the two upper bolts, then release the upper locking tab. Slide the housing forward and disconnect the rear electrical connector without pulling on the harness.
- Transfer compatible H11 low-beam and H9 high-beam bulbs and required sockets. Reconnect the harness, engage the locking tab and start all mounting bolts before securing the housing. Refit the bumper, liners and radiator cover, test the lamps and have beam aim checked.
Frequently Asked Questions
What should I check before ordering?
Fits 2013-2015 Altima 4-door sedans with factory halogen headlights only. Not compatible with factory HID/Xenon headlights. Bulbs are not included.
Are bulbs included?
No. This package contains the left and right headlight assemblies; bulbs are not included.
What access is needed to replace the assemblies?
Release the forward radiator-cover push pins and the lower bumper-cover plate fasteners. Pull the wheel-liner edges aside to reach the corner bolt-and-nut attachments, then support the bumper while separating its fender-side retainers.