Chrome Projector Halogen Headlights Pair for Subaru WRX (2015-2020)
$285.95
Passer aux informations sur le produit
Chrome Projector Halogen Headlights Pair for Subaru WRX (2015-2020)
$285.95
DS-84001VA021-CH
Free shipping to the lower 48 · Returns & refunds · Questions? Contact us
New chrome-interior projector halogen headlight pair for the 2015-2020 Subaru WRX. H11 low projector, 9005 high. The seller lists bulbs as included.
Fitment
| Year | Make / Model | Fits |
|---|---|---|
| 2015-2020 | Subaru / WRX | Factory halogen headlights |
Will NOT fit: WRX STI, WRX Limited with factory LED headlights, or 2021+ WRX.
Common Reasons to Replace
- Yellowed, hazy, or cracked factory lenses cutting light output
- Moisture or condensation inside the housing
- Broken mounting tabs or collision damage
- Refreshing the front end with a new chrome look
Specs
- Light type: Halogen projector (H11 low + 9005 high)
- Housing: Chrome, clear lens
- Bulbs: Low beam H11, high beam 9005, side marker T10 (bulbs included)
- Lens: Polycarbonate; housing: polypropylene
- DOT & SAE compliant
- Fitment type: Direct replacement, plug-and-play connectors
- Quantity: Pair (Left + Right)
- Condition: New
Interchange Part Numbers
OEM: 84001VA021, 84001VA031 · Partslink: SU2502152, SU2503152
What's Included
- 1 x Driver-side headlight assembly
- 1 x Passenger-side headlight assembly
- Bulbs included: Low beam H11, high beam 9005, side marker T10
Installation (2015-2020 Subaru WRX)
Tools: 10 mm socket and ratchet, push-pin tool, Phillips screwdriver.
- Disconnect the negative battery cable.
- Remove the push pins along the top of the radiator panel and the grille.
- Remove the bumper cover fasteners in the wheel wells and underneath, release the fender clips, unplug the fog lights and remove the cover.
- Remove the headlight bolts and pull the lamp forward.
- Unplug the connectors.
- Install the new lamp, reconnect, test, refit the bumper and aim.
Steps based on the Subaru WRX (VA) service manual LI section and NASIOC owner write-ups.
FAQ
Will these fit a WRX STI?
No. STI models use LED or HID headlights. This pair is for halogen-equipped WRX models.
Do I have to remove the front bumper?
Yes. The headlights on the 2015-2020 WRX are reached after removing the front bumper cover.
What bulb sizes do these use?
Low beam H11, high beam 9005, side marker T10 (bulbs included).
Can I put LED bulbs in these?
Yes. These are halogen housings, so H11/9005 LED conversion kits fit. Use a quality kit with a CANbus decoder if you see flicker or a bulb-out warning, and re-aim the beams after install.