Chrome Projector Headlights Pair w/ LED DRL for Ford Mustang Halogen (2010-2014)

Upgrade your 2010-2014 Ford Mustang with factory halogen headlights to this brand-new pair of chrome projector headlights with LED DRL light bar, bulbs included.

Fitment

Will NOT fit: Mustang with factory HID/Xenon; Shelby GT500 with HID; 2015+ Mustang.

Common Reasons to Replace

• Yellowed, hazy, or oxidized lenses reducing light output
• Cracked lens or broken mounting tabs
• Moisture or condensation inside the housing
• Collision damage

Specs

• Housing: Chrome
• Projector with LED DRL bar
• Bulbs: included (size not stated in listing)
• DOT compliant
• Quantity: Pair (Left + Right)
• Condition: New

Interchange Part Numbers

OEM: AR3Z13008A, FO2503281, AR3Z13008B, FO2502281. Partslink: FO2503281, FO2502281.

What's Included

• 1 x Driver side headlight assembly
• 1 x Passenger side headlight assembly
• Bulbs installed

Installation

1. Open the hood and remove the eight plastic clips from the radiator cover.
2. Remove the 8 mm bolts and the screw-type clips holding the bumper pillars to the headlight edges.
3. Remove the twelve 7 mm bolts under the bumper and the three 7 mm bolts at each side in the wheel well.
4. Pull the bumper corners away from the fenders, unplug the fog and side-marker lights, and set the bumper aside.
5. Remove the two lower 10 mm headlight bolts and one upper 10 mm bolt, pry out the plastic pin retainer, slide the lamp forward and unplug its two connectors.
6. Test all functions, tighten the bolts to 8 Nm (71 lb-in), reassemble and aim.

Steps compiled from Ford 2012-2014 Mustang workshop procedure, Morimoto and AmericanMuscle 2010-2014 Mustang install guides. Professional installation and headlight aiming are recommended.

FAQs

What bulb sizes do these headlights use?
Bulbs are included; the listing does not state the headlight bulb size, so match your factory bulb size if you ever replace them.

Will these fit a Mustang with HID?
No. Halogen cars only.

Do I need to remove the front bumper to replace these headlights?
Yes. Remove the radiator cover clips, 8 mm pillar bolts and the 7 mm bolts underneath and in the wheel wells; each lamp is then held by three 10 mm bolts.

Do these fit both 2010-2012 and 2013-2014 Mustangs?
The seller lists 2010-2014 fitment for halogen cars. The 2013-2014 cars use different lower lighting; compare your connector if unsure.

Can I install HID or LED kits?
Yes. These use halogen bulbs, so a plug-in LED or HID kit in the same size can be used; aim afterward.