GENSSI hero — clear lens black housing tail lights pair for Honda Pilot (2003-2008) on white

Clear Lens Black Housing Tail Lights Pair for Honda Pilot (2003-2008)

$188.95
Passer aux informations sur le produit
GENSSI hero — clear lens black housing tail lights pair for Honda Pilot (2003-2008) on white

Clear Lens Black Housing Tail Lights Pair for Honda Pilot (2003-2008)

$188.95
DS-PILOT-TAIL-CLR-BLK-PAIR-2003-2008

Free shipping to the lower 48 · Returns & refunds · Questions? Contact us

The first-generation Pilot's red factory lenses look dated from a car length back, and this clear-lens pair in a black housing darkens those corners by day while the red brake bulb and amber turn bulb still read at night. GENSSI's set is a vehicle-specific left and right assembly for the 2003-2008 Pilot, not a lens cover, and it reuses the factory sockets with no splicing.

Important Fitment Note: Fits every 2003-2008 Honda Pilot. The 2009-2015 Pilot uses a different tail lamp.

Fitment

YEAR MAKE / MODEL FITS
2003-2008 Honda / Pilot, all models Yes
2009-2015 Honda / Pilot No

Specs

  • Style: Black housing with a clear lens; polycarbonate lens with UV protection and high impact resistance
  • Bulbs: Incandescent. Bulbs included: 2x 7443 red (brake), 2x 7440 amber (turn), and 2x 194 red (side marker). Sockets are not included — reuse the factory sockets. Reverse on this Pilot is in the tailgate, not in this corner lamp
  • Sold as: Pair — left and right tail light assemblies, with bulbs
  • Fit: Direct replacement for all 2003-2008 Honda Pilot models; plug and play on the factory sockets, no splicing

Interchange

33551-S9V-A02, 33551-S9V-A01, 33501-S9V-A02, 33551-S9V-A11, 33501-S9V-A11

What's included

  • 1x Driver (left) clear lens black housing tail light assembly
  • 1x Passenger (right) clear lens black housing tail light assembly
  • 2x 7443 red bulbs
  • 2x 7440 amber bulbs
  • 2x 194 red bulbs

Installation — Honda Pilot (2003-2008)

  1. Open the tailgate. On the inner edge of the corner lamp, remove the two screws with an 8 mm socket on a short ratchet, or a Phillips screwdriver. One screw sits high and one sits low on the gray inner edge.
  2. Lay a towel on the bumper. Pull the lamp straight rearward. Two plastic pegs on the outer edge hold it to the quarter panel. If it sticks, work a plastic trim tool along the outer edge until the pegs release. Do not pry on the lens.
  3. Twist each socket a quarter turn counterclockwise and pull it out. The turn socket is the larger one at the top, the side-marker socket is the small one toward the outer edge, and the brake socket is the large one at the bottom. Unclip the harness from the stays molded into the housing. Sockets are not in the box.
  4. Seat those sockets in the new housing and lock them a quarter turn clockwise. Push the included red 7443 straight into the brake socket, the amber 7440 into the turn socket, and the red 194 into the side-marker socket.
  5. Clip the harness back into the stays. Line the two pegs up with the grommets in the quarter panel and push the lamp on until the pegs seat. Start both screws and snug them. Do not overtighten the plastic.
  6. Check parking, brake, and both turn signals. The reverse lamps on this Pilot are in the tailgate, not in these corner assemblies.

Buyer FAQ

Is this a clear cover or a full tail light? A full left and right assembly. The clear lens is bonded to a black housing and replaces the factory corner lamp. It does not sit over the original light.

Do I have to splice wires? No splicing. Move the factory sockets into the new housings and lock them. The box includes a red 7443, an amber 7440, and a red 194 for each side. The sockets themselves stay with the truck.

Which Pilots fit, and what is in the box? Every 2003-2008 Honda Pilot. You get one driver-side and one passenger-side assembly plus the bulbs above. It replaces 33551-S9V-A02 and 33501-S9V-A02 on 2003-2005, and 33551-S9V-A11 and 33501-S9V-A11 on 2006-2008. The 2009-2015 Pilot is a different lamp.

Vous aimerez peut-être aussi