Clear Lens Tail Lights Pair w/ Bulbs for Dodge Durango (2004-2009)
Free shipping to the lower 48 · Returns & refunds · Questions? Contact us
A red factory lens leaves a 2004-2009 Durango looking plain from the quarter, and this clear pair opens that lamp so the amber turn and red brake bulbs read through a chrome housing at night. GENSSI's set is a left and right assembly for that Durango, including the 2009 Hybrid, and the factory socket plate bolts on with no splicing.
Important Fitment Note: 2004-2009 Durango only, including the 2009 Hybrid. A 1998-2003 Durango and a 2011-2025 Durango use different lamps. A Dakota does not use this housing.
Fitment
| YEAR | MAKE / MODEL | FITS |
|---|---|---|
| 2004-2009 | Dodge / Durango | Yes |
| 1998-2003 | Dodge / Durango | No |
| 2011-2025 | Dodge / Durango | No |
| 2005-2011 | Dodge / Dakota | No |
Specs
- Style: Chrome housing with a clear lens
- Bulbs: Incandescent. Two red 3157 bulbs, two amber 3157 bulbs, two clear 3157 bulbs, and two red 194 bulbs are in the box. The socket plate is not included
- Sold as: Pair — left and right clear tail lights and eight color bulbs. The socket plate is not included
- Fit: 2004-2009 Dodge Durango, every trim, including the 2009 Hybrid. Factory socket plate, no splicing
Interchange
5133169AA, 5133169AH, 5133169AI, 5133168AA, 5133168AH, 5133168AI, CH2818101, CH2818114, CH2819101, CH2819114
What's included
- 1x Driver (left) clear tail light
- 1x Passenger (right) clear tail light
- 2x Red 3157 bulbs
- 2x Amber 3157 bulbs
- 2x Clear 3157 bulbs
- 2x Red 194 bulbs
Installation — Dodge Durango (2004-2009)
- Open the tailgate. This pair is the 2004-2009 quarter lamp, including the 2009 Hybrid. A 1998-2003 Durango and a 2011-up Durango use a different housing.
- The only tool for the housing is a trim tool or a flat screwdriver for the two push-pin clips. A T25 Torx driver moves the socket plate.
- Pry the center of each push-pin, then pry the clip body out of the inner edge of the lamp.
- Pull the lamp down and out. Release the lock tab on the harness and unplug it. Do not hang the lamp from the wires.
- Remove the three T25 screws that hold the connector plate to the back of the old lamp. Pull the plate free. The plate is not in the box.
- The bulbs pull straight out. Seat the included red, amber, and clear 3157 bulbs and the red 194 in the matching sockets, then press the plate onto the new housing and snug the three T25 screws.
- Plug the harness in until the lock clicks. Line the guide pins up, push the lamp in, and press both clips home. Check park, brake, both turn signals, and reverse, then repeat on the other side.
Buyer FAQ
Does a 2011 Durango fit? No. This pair is the 2004-2009 lamp, including the 2009 Hybrid. A 1998-2003 Durango and a 2011-2025 Durango use different housings. A Dakota does not use this lamp.
Are the sockets included? No. Move the factory connector plate. The box has the left and right clear housings plus two red 3157, two amber 3157, two clear 3157, and two red 194 bulbs.
Which part numbers does this replace? Left replaces 5133169AA, 5133169AH, and 5133169AI. Right replaces 5133168AA, 5133168AH, and 5133168AI.