GENSSI hero — clear lens tail lights pair for Toyota Tundra (2014-2021) on white

Clear Lens Tail Lights Pair w/ Bulbs for Toyota Tundra (2014-2021)

$104.95
Passer aux informations sur le produit
GENSSI hero — clear lens tail lights pair for Toyota Tundra (2014-2021) on white

Clear Lens Tail Lights Pair w/ Bulbs for Toyota Tundra (2014-2021)

$104.95
DS-TUNDRA-TAIL-CLEAR-PAIR-2014-2021

Free shipping to the lower 48 · Returns & refunds · Questions? Contact us

A red factory lens leaves a 2014-2021 Tundra looking plain from behind, and this clear pair opens that bedside lamp so the amber turn and red brake bulbs read through a chrome housing at night. GENSSI's set is a left and right assembly for that Tundra, not a 2007-2013 or 2022-up lamp, and the factory sockets twist in with no splicing.

Important Fitment Note: 2014-2021 Tundra only. A 2007-2013 Tundra and a 2022-2026 Tundra use different lamps. The factory brake bulb is clear behind a red lens, so this clear lens uses the included red 3157.

Fitment

YEAR MAKE / MODEL FITS
2014-2021 Toyota / Tundra Yes
2007-2013 Toyota / Tundra No
2022-2026 Toyota / Tundra No

Specs

  • Style: Chrome housing with a clear lens
  • Bulbs: Incandescent. Two amber 921 turn bulbs and two red 3157 brake bulbs are in the box. Two clear 7440 reverse bulbs are not included. Sockets are not included
  • Sold as: Pair — left and right clear tail lights, plus two amber 921 bulbs and two red 3157 bulbs. Reverse bulbs and sockets are not included
  • Fit: 2014-2021 Toyota Tundra, every trim that uses these bedside lamps. Factory sockets, no splicing

Interchange

81560-0C101, 81560-0C100, 81550-0C101, 81550-0C100

What's included

  • 1x Driver (left) clear tail light
  • 1x Passenger (right) clear tail light
  • 2x Amber 921 bulbs
  • 2x Red 3157 bulbs

Installation — Toyota Tundra (2014-2021)

  1. Open the tailgate. This pair is the 2014-2021 lamp. A 2007-2013 Tundra and a 2022-2026 Tundra use a different housing.
  2. The fasteners are two T30 Torx screws, one at the top of the lamp and one at the bottom. Use a T30 bit and a ratchet.
  3. Remove both screws. Pull the housing straight back off the guide pins. Support it. Do not hang it from the wires.
  4. Twist out the three sockets. The upper socket is the turn signal. The lower large socket is brake and park. The remaining socket is reverse.
  5. The factory brake bulb is a clear 3157 because the original lens is red. Seat the included red 3157 in that socket so the brake stays red through this clear lens. Seat the included amber 921 in the turn socket.
  6. Leave the factory clear 7440 in the reverse socket. That bulb is not in the box. Lock all three sockets into the new housing.
  7. Line the guide pins up and push the lamp in until it seats. Reinstall the two T30 screws snug. Check park, brake, both turn signals, and reverse, then repeat on the other side.

Buyer FAQ

Does a 2022 Tundra fit? No. This pair is the 2014-2021 lamp. A 2007-2013 Tundra and a 2022-2026 Tundra use different housings.

Are the reverse bulbs included? No. Two amber 921 turn bulbs and two red 3157 brake bulbs are in the box. Move the factory clear 7440 reverse bulbs and all three sockets.

Which part numbers does this replace? Left replaces 81560-0C101 and 81560-0C100. Right replaces 81550-0C101 and 81550-0C100.

Vous aimerez peut-être aussi