GENSSI hero — full LED halo projector black headlights Ford F150 Mark LT (2004-2008) white background

FULL LED Halo Projector Black Headlights for Ford F-150 / Mark LT (2004-2008)

$321.95
Passer aux informations sur le produit
GENSSI hero — full LED halo projector black headlights Ford F150 Mark LT (2004-2008) white background

FULL LED Halo Projector Black Headlights for Ford F-150 / Mark LT (2004-2008)

$321.95
DS-F150-MARKLT-HEAD-FULL-LED-HALO-PROJ-BLK-2004-2008

Free shipping to the lower 48 · Returns & refunds · Questions? Contact us

Cloudy stock F-150 lamps flatten an 11th-gen truck face—FULL LED halo projectors put a sharp blackout LED signature on the 2004-2008 front. GENSSI's Ford F-150 / Mark LT pair is a vehicle-specific FULL LED set that bolts in with the factory three-bolt mount and plugs into the harness.

Important Fitment Note: Fits 2004-2008 Ford F-150 (all models) and 2006-2008 Lincoln Mark LT. These are FULL LED halo projector assemblies—not halogen housings with LED DRL only. Does not fit 2009-2014 F-150.

Fitment

YEAR MAKE / MODEL FITS
2004-2008 Ford / F-150 Yes
2006-2008 Lincoln / Mark LT Yes

Specs

  • Style: Black housing, clear and amber lenses, FULL LED halo projector
  • Bulbs: FULL LED low / high / halo — built-in LEDs (6000K)
  • Sold as: FULL LED halo projector headlight pair
  • Fit: Direct-fit FULL LED projector assemblies for 2004-2008 F-150 and 2006-2008 Mark LT

Interchange

4L3Z-13008-AA, 5L3Z-13008-BA, 7L3Z-13008-GA, 7L3Z-13008-HA, 7L3Z-13008-DA, 4L3Z-13008-BA, 5L3Z-13008-AC, 7L3Z-13008-FA, 7L3Z-13008-EA, 7L3Z-13008-CA

What's included

  • 1x Driver FULL LED halo projector headlight
  • 1x Passenger FULL LED halo projector headlight

Installation — Ford F-150 / Lincoln Mark LT (2004-2008)

  1. Park on level ground, set the parking brake, switch lights and ignition off, and disconnect the negative battery cable.
  2. Open the hood. Remove the Phillips clip / screws securing the plastic radiator cover beside each headlight and pull the cover back for bolt access.
  3. Remove the three 10 mm bolts on each assembly (one on top, two on the side). Lift the locating tab and pull the factory headlight up and out.
  4. Disconnect the harness plugs on the back of each lamp and set the factory assemblies aside.
  5. Align each new FULL LED halo projector on the body locating pins, reconnect the harness plugs, install the three 10 mm bolts, and refit the plastic covers.
  6. Reconnect the battery, test low beam, high beam, halo / parking, and turn signals, then aim the beams on a level surface.

Buyer FAQ

Are these just halogen lamps with LED halos? No. These are FULL LED halo projector assemblies—low, high, and halo are LED.

Will these fit a 2009-2014 F-150? No. Fitment is 2004-2008 F-150 and 2006-2008 Mark LT only.

Do I splice wiring? No. After removing the three 10 mm bolts per side, the assemblies seat on the locating pins and plug into the factory harness.

Vous aimerez peut-être aussi