Full LED Headlights Pair for Buick Regal (2018-2020), Reuse Factory Module

Replace cracked or hazy headlights on your 2018-2020 Regal with this brand-new full LED pair. LED modules are not included; transfer yours.

Fitment

Will NOT fit: Halogen models; 2011-2017 Regal.

Common Reasons to Replace

• Yellowed, hazy, or oxidized lenses reducing light output
• Cracked lens or broken mounting tabs
• Moisture or condensation inside the housing
• Collision damage

Specs

• Low/high beam, DRL, turn: built-in LED
• LED module: not included (reuse factory)
• DOT compliant
• Quantity: Pair (Left + Right)
• Condition: New

Interchange Part Numbers

OEM: 39050376. Partslink: .

What's Included

• 1 x Driver side headlight assembly
• 1 x Passenger side headlight assembly
• Left and right headlights

Installation

1. Turn the wheel to full lock and remove the three T15 screws in each front wheel-well liner, then the vertical 10 mm screw behind the liner at the bumper/fender seam.
2. Open the hood and remove the four T20 screws across the upper fairing.
3. Remove the seven 7 mm screws along the rear of the splash shield, pull the bumper free, rest it on a box and unplug the harness behind the passenger high beam (slide the red lock down).
4. Remove the headlamp bolts, unplug and remove the lamp, install the new one, refit the bumper and aim the headlights.

Steps compiled from BuickForums "How to swap a TourX to Sportback front bumper" step-by-step thread. Professional installation and headlight aiming are recommended.

FAQs

Is the LED module included?
No. Move the modules from your original lamps.

Will these fit a halogen Regal?
No. Factory LED models only.

Do I need to remove the front bumper to replace these headlights?
Yes. The front bumper fascia has to come off to reach the headlamp bolts. Plan on 1-2 hours with a helper.

Can I install HID or LED kits?
Not applicable. The low and high beams are built-in factory LED; there is no replaceable headlight bulb for an LED or HID kit.