Full LED Headlights Pair w/ Cornering Lamp for Cadillac CT6 (2019-2020)

Replace damaged LED headlights on your 2019-2020 Cadillac CT6 with this brand-new full LED pair with cornering lamp. Reuse your factory control module.

Fitment

Will NOT fit: 2016-2018 CT6.

Common Reasons to Replace

• Yellowed, hazy, or oxidized lenses reducing light output
• Cracked lens or broken mounting tabs
• Moisture or condensation inside the housing
• Collision damage

Specs

• Low/high beam, DRL, cornering: LED
• Module: not included
• DOT compliant
• Quantity: Pair (Left + Right)
• Condition: New

Interchange Part Numbers

OEM: 84718736, 84450677, 84499197, 84650038, 84450678, 84499198, 84650039. Partslink: .

What's Included

• 1 x Driver side headlight assembly
• 1 x Passenger side headlight assembly
• Headlight pair (module not included)

Installation

1. Open the hood, remove the upper radiator close-out panel and fascia fasteners along the top.
2. Remove the front wheel-liner fasteners and the lower fascia/air-deflector bolts, release the fascia from the fender brackets, pull it forward and unplug sensors and fog/cornering wiring.
3. Remove the headlamp bolts, unplug the lamp and lift it out.
4. Transfer the factory LED control module, install the new lamp, refit the fascia and aim the headlights.

Steps compiled from GM Cadillac CT6 headlamp replacement procedure (front fascia removal). Professional installation and headlight aiming are recommended.

FAQs

Is the control module included?
No. Transfer your factory module.

Will these fit a 2018 CT6?
No. The 2019 refresh uses different headlights.

Do I need to remove the front bumper to replace these headlights?
Yes. On the 2019-2020 CT6 the front bumper cover has to come off to reach the headlamp mounting bolts.

Can I install HID or LED kits?
Not applicable. The low and high beams are built-in factory LED; there is no replaceable headlight bulb for an LED or HID kit.