Full LED Headlights Pair w/ LED Module, Chrome for GMC Sierra 2500HD 3500HD (2020-2023)

Full LED Headlights Pair w/ LED Module, Chrome for GMC Sierra 2500HD 3500HD (2020-2023)

$638.95
Passer aux informations sur le produit
Full LED Headlights Pair w/ LED Module, Chrome for GMC Sierra 2500HD 3500HD (2020-2023)

Full LED Headlights Pair w/ LED Module, Chrome for GMC Sierra 2500HD 3500HD (2020-2023)

$638.95
DS-86788463

Free shipping to the lower 48 · Returns & refunds · Questions? Contact us

Restore the C-shaped LED signature on your 2020-2023 Sierra HD with this brand-new full LED pair with LED signal lamp and module.

Fitment

Year Make / Model Fits
2020-2023 GMC Sierra 2500HD / 3500HD AT4, Denali, SLE, SLT, Base (2020-21), Pro (2022-23) (factory full LED) Factory full LED headlights

Will NOT fit: Sierra HD with factory halogen turn-signal headlights; Sierra 1500.

Common Reasons to Replace

  • Yellowed, hazy, or oxidized lenses reducing light output
  • Cracked lens or broken mounting tabs
  • Moisture or condensation inside the housing
  • Collision damage

Specs

  • Low/high beam, DRL, turn: built-in LED
  • LED module: included
  • DOT compliant
  • Quantity: Pair (Left + Right)
  • Condition: New

Interchange Part Numbers

OEM: 86788463, 84685634, 84695493, 84725316, 84738614, 85138649, 85149463, 84685635, 84695494, 84725317, 84738615, 85138650, 85149464. Partslink: GM2502513.

What's Included

  • 1 x Driver side headlight assembly
  • 1 x Passenger side headlight assembly
  • LED module included

Installation

  1. Open the hood, remove the two T15 screws at the hood latch and the ten clips holding the radiator/upper shield, and lift the shield off.
  2. Unplug the grille-mounted sensor/fog and front-camera connectors, then remove the grille: four 10 mm bolts across the top and two 10 mm bolts on each side.
  3. Remove the fender-liner screws and the corner screw at each end and take off the side bumper panel to expose the lower headlamp bolt.
  4. Remove the three 10 mm headlamp bolts, lift the lamp off its upper bracket, unplug it, install the new lamp and reverse; aim the headlights.

Steps compiled from Ranch Hand 2020+ Silverado/Sierra HD grille-guard install guide (grille and headlamp access) and GM service procedure. Professional installation and headlight aiming are recommended.

FAQs

Will these fit a Sierra HD with halogen turn signals?
No. Factory full LED models only.

Will these fit a Sierra 1500?
No.

Do I need to remove the front bumper to replace these headlights?
No. The grille and side panels come off; the headlamp is held by three 10 mm bolts.

Can I install HID or LED kits?
Not applicable. The low and high beams are built-in factory LED; there is no replaceable headlight bulb for an LED or HID kit.

Vous aimerez peut-être aussi