Halogen Headlights Pair for GMC Sonoma (1998-2004), Jimmy (1998-2001), and Oldsmobile Bravada (1998-2001)

Give a late-1990s GMC compact truck or SUV a clean factory look again. This original-style halogen pair replaces tired or damaged headlights on 1998-2004 Sonoma, 1998-2001 Jimmy, and 1998-2001 Bravada that were built without fog lamps in the headlight housing. Each lamp uses the factory 9006 bulb and the factory connector, and is DOT and SAE compliant. This is a direct-fit pair — no splicing.

Fitment

Specs

• Sold as: driver and passenger pair
• Housing / style: original-style housing, clear lens, amber reflector, no integral fog lamp
• Lighting: halogen, with 9006 bulbs included
• DOT and SAE compliant
• New aftermarket assemblies, designed to replace the factory halogen units

Bulb size: 9006 (included).

In the Box

• Driver-side headlight assembly
• Passenger-side headlight assembly
• 9006 halogen bulbs

Interchange References

Replaces the original halogen housings used under 16526227 (driver) and 16526228 (passenger), and Partslink GM2502174 / GM2503174. This is not the Chevrolet S10 / Blazer lamp (GM2502172) or the integral-fog lamp (GM2502173).

Installation: GMC Sonoma (1998-2004), GMC Jimmy (1998-2001), and Oldsmobile Bravada (1998-2001)

On these GMC compact trucks and SUVs, the headlights are typically held by plastic retaining clips in the panel above the lamp, not by bolts. Professional installation and beam aiming are recommended. Switch off the lights and ignition, set the parking brake, and disconnect the negative battery cable before you start.

1. Open the hood. Remove the two plastic retaining clips from the panel above the headlight. If a clip is brittle or broken, replace it (GM 10298115 is the common clip for this generation).
2. Pull the assembly forward and unplug the factory connector. Do not pull on the wiring.
3. Install the included 9006 bulbs in the new housings. Connect the factory-style connector, line up the assembly in the opening, and snap the retaining clips back into place. Repeat on the other side.
4. Reconnect the battery and test low beam and high beam. Aim the lamps on a level surface before driving at night.

Frequently Asked Questions

Which vehicles do these headlights fit?
GMC Sonoma 1998-2004, GMC Jimmy 1998-2001, and Oldsmobile Bravada 1998-2001 without integral fog lamps in the headlight housing. They will not fit Chevrolet S10 or Blazer, later Bravada, or the fog-in-housing lamp. Compare your current lamps with our photos before ordering.

Will they fit a Chevy S10 or Blazer, or a housing with built-in fog lamps?
No. Chevrolet S10 and Blazer use a different Partslink (GM2502172). Housings with integral fog lamps are a different assembly (GM2502173). This pair is the no-fog GMC / Bravada lamp only.

Are these a pair or a single lamp?
This is a complete driver and passenger pair, not a single-side lamp.

Do they include bulbs?
Yes. 9006 halogen bulbs are included for both assemblies.

How are they installed on a 1998-2004 Sonoma or 1998-2001 Jimmy / Bravada?
On these trucks, the headlight is typically held by two plastic retaining clips in the panel above the lamp, not by bolts. Pull the clips, bring the assembly forward, and unplug the harness. Install the new lamp with the included 9006 bulbs, reconnect, snap the clips back into place, and aim the lamps before nighttime driving. Replacement clips are GM 10298115 if an original clip is brittle.