Halogen Headlights Pair for Jeep Grand Cherokee (1993-1998)
$68.95
Passer aux informations sur le produit
Halogen Headlights Pair for Jeep Grand Cherokee (1993-1998)
$68.95
DS-56005093
Free shipping to the lower 48 · Returns & refunds · Questions? Contact us
Fitment warning: These headlights fit 1993-1998 Jeep Grand Cherokee (ZJ) only. They will not fit 1999-2004 Grand Cherokee (WJ), which uses a different housing. This pair is the two headlight assemblies only and does not include the corner or turn-signal lamps. 9004 halogen bulbs are included.
Give a 1993-1998 Jeep Grand Cherokee a clean factory look again. This original-style halogen pair replaces tired or damaged rectangular headlights on ZJ Grand Cherokees. Each lamp is DOT and SAE compliant, and the 9004 halogen bulbs come in the box so you can install a complete pair.
Fitment
| Years | Vehicle | Notes |
|---|---|---|
| 1993-1998 | Jeep Grand Cherokee (ZJ) | Headlight assemblies only. Does not include corner / turn-signal lamps. Will not fit 1999-2004 WJ. |
Specs
- Sold as: driver and passenger pair
- Housing / style: original-style rectangular halogen housing, clear lens
- Lighting: halogen, with 9004 bulbs included
- DOT and SAE compliant
- New aftermarket assemblies, designed to replace the factory halogen units
Bulb size: 9004 (included).
In the Box
- Driver-side headlight assembly
- Passenger-side headlight assembly
- 9004 halogen bulbs
Interchange References
Replaces the original halogen housings used under 56005093 (driver) and 56005092 (passenger), including 55055119AB and 55055118AB, and Partslink CH2502104 / CH2503104.
Installation: Jeep Grand Cherokee (1993-1998)
On the 1993-1998 Grand Cherokee (ZJ), the corner / turn-signal lamp comes out first so you can reach the headlight. You do not need to remove the bumper. Professional installation and beam aiming are recommended. Switch off the lights and ignition, set the parking brake, and disconnect the negative battery cable before you start.
- Open the hood. Remove the two Torx screws that hold the corner / turn-signal lamp, pull that lamp forward, and unplug its connector. Set it aside.
- Pull the headlight assembly straight out a few inches, reach behind it, and unplug the factory connector. Do not pull on the wiring. Lift the housing out.
- Connect the factory-style connector to the new assembly, align the mounting pins, and press the lamp firmly into place. Repeat on the other side.
- Reinstall the corner / turn-signal lamp and its screws, reconnect the battery, and test low beam, high beam, and the turn signal. Aim the lamps on a level surface before driving at night.
Frequently Asked Questions
Which vehicles do these headlights fit?
1993-1998 Jeep Grand Cherokee (ZJ). Compare your current lamps with our photos before ordering.
Will they fit a 1999-2004 Grand Cherokee?
No. The 1999-2004 Grand Cherokee (WJ) uses a different headlight housing. This pair is for the 1993-1998 ZJ only.
Do they include the corner or turn-signal lamps?
No. This is a driver and passenger headlight pair only. The corner / turn-signal lamps are separate parts.
Are these a pair or a single lamp?
This is a complete driver and passenger pair, not a single-side lamp.
Do they include bulbs?
Yes. 9004 halogen bulbs are included for both assemblies.
How are they installed on a 1993-1998 Grand Cherokee?
Remove the two Torx screws on the corner / turn-signal lamp, pull it forward, and unplug it. Pull the headlight out, unplug the connector behind it, and press the new lamp onto the mounting pins. Reinstall the corner lamp and aim the beams before nighttime driving.