Halogen Headlights Pair w/ LED DRL & Bulbs for Volkswagen Jetta (2017-2018)
Free shipping to the lower 48 · Returns & refunds · Questions? Contact us
Replace yellowed or cracked headlights on your 2017-2018 Volkswagen Jetta with this brand-new halogen pair with LED daytime running light, bulbs included.
Fitment
| Year | Make / Model | Fits |
|---|---|---|
| 2017-2018 | Volkswagen Jetta (factory halogen w/ LED DRL) | Factory halogen headlights |
Will NOT fit: HID/Bi-Xenon Jetta; Jetta GLI with LED; 2019+ Jetta; Jetta SportWagen.
Common Reasons to Replace
- Yellowed, hazy, or oxidized lenses reducing light output
- Cracked lens or broken mounting tabs
- Moisture or condensation inside the housing
- Collision damage
Specs
- Low beam: H7
- High beam: H7
- Turn signal: 1156A
- DRL/side marker: LED
- DOT compliant
- Quantity: Pair (Left + Right)
- Condition: New
Interchange Part Numbers
OEM: 5C7941006J. Partslink: VW2502168, VW2503168.
What's Included
- 1 x Driver side headlight assembly
- 1 x Passenger side headlight assembly
- H7, H7 and 1156A bulbs included
Installation
- Remove the T30 bolts on top of each headlamp and lift off the black upper headlamp bracket.
- Remove the four T25 bolts along the top of the bumper, the T25 bolts underneath, and the three T25 bolts in each wheel well (peel back the taped liner trim to reach the downward T25 screw).
- Pry the bumper out of its side guides, pull it forward evenly with a helper and unplug the fog lights.
- Remove the last T30 headlamp bolt behind the grille, press the clip to release the harness and lift the lamp out. Install the new lamp, refit the bracket and bumper, and aim the headlights.
Steps compiled from 1A Auto "How to Replace Headlights 2011-2018 Volkswagen Jetta" and "Remove Front Bumper 2011-18 Jetta" videos. Professional installation and headlight aiming are recommended.
FAQs
What bulb sizes do these headlights use?
Per the listing: H7 low beam, H7 high beam and 1156A turn signal, included; LED DRL built in.
Will these fit a 2019 Jetta?
No. The 2019+ Jetta (MK7) uses a different headlight.
Do I need to remove the front bumper to replace these headlights?
Yes. The bumper comes off (T25 bolts top, bottom and wheel wells) to reach the last T30 headlamp bolt behind the grille.
Can I install HID or LED kits?
Yes. This is a halogen housing, so a plug-in LED or HID kit in your factory bulb size can be used. Aim the headlights afterward.