Halogen Projector Headlights Pair w/ LED DRL & Bulbs for Chevy Equinox (2018-2021)

Replace yellowed or cracked headlights on your 2018-2021 Chevrolet Equinox with this brand-new halogen projector pair with LED DRL, bulb included.

Fitment

Will NOT fit: HID Equinox; full-LED Equinox; 2022+ Equinox.

Common Reasons to Replace

• Yellowed, hazy, or oxidized lenses reducing light output
• Cracked lens or broken mounting tabs
• Moisture or condensation inside the housing
• Collision damage

Specs

• Low/high beam: 9012
• Running lights: LED
• DOT compliant
• Quantity: Pair (Left + Right)
• Condition: New

Interchange Part Numbers

OEM: 84818197, 84753435, 86541959, 84194561, 84258447, 84428283, 86541960, 84194562, 84258448, 84428284, 84753436, 84818198. Partslink: GM2502469, GM2503469.

What's Included

• 1 x Driver side headlight assembly
• 1 x Passenger side headlight assembly
• 9012 bulbs included

Installation

1. Disconnect the battery. Open the hood, remove the upper radiator close-out panel clips and the fascia screws along the top.
2. Remove the front wheel-liner screws and pull the liners back, then remove the lower fascia screws/air-deflector fasteners underneath.
3. Release the fascia from the fender guides, pull it forward and unplug the fog/sensor wiring.
4. Remove the headlamp bolts, unplug and remove the lamp, install the new one, refit the fascia and aim the headlights.

Steps compiled from GM Parts headlight replacement guide and Equinox Forum 2018+ headlight removal threads. Professional installation and headlight aiming are recommended.

FAQs

What bulb sizes do these headlights use?
Per the listing: 9012 low/high beam bulb included; LED running lights built in.

Will these fit an Equinox with HID?
No. The listing marks HID lamps as not a match.

Do I need to remove the front bumper to replace these headlights?
Yes. On the 2018-2021 Equinox the front fascia must be removed to reach the lower headlamp bolts.

Can I install HID or LED kits?
Yes. This is a halogen housing, so a plug-in LED or HID kit in your factory bulb size can be used. Aim the headlights afterward.