HID Projector Headlights Pair w/ LED DRL for Chevy Camaro (2016-2024)
$338.95
Passer aux informations sur le produit
HID Projector Headlights Pair w/ LED DRL for Chevy Camaro (2016-2024)
$338.95
DS-84364823
Free shipping to the lower 48 · Returns & refunds · Questions? Contact us
Replace yellowed or cracked HID headlights on your 2016-2024 Chevrolet Camaro with this brand-new pair of HID projector headlights with LED DRL.
Fitment
| Year | Make / Model | Fits |
|---|---|---|
| 2016-2024 | Chevrolet Camaro (factory HID) | Factory HID projector headlights |
Will NOT fit: Halogen Camaro; 2010-2015 Camaro.
Common Reasons to Replace
- Yellowed, hazy, or oxidized lenses reducing light output
- Cracked lens or broken mounting tabs
- Moisture or condensation inside the housing
- Collision damage
Specs
- Low beam: D3S HID (not included)
- Turn signal: 7440NA
- Running: LED
- DOT compliant
- Quantity: Pair (Left + Right)
- Condition: New
Interchange Part Numbers
OEM: 84364823, 23311244, 23361133, 23383315, 23509015, 84078853, 84129203. Partslink: GM2502423 GM2503423.
What's Included
- 1 x Driver side headlight assembly
- 1 x Passenger side headlight assembly
- 7440NA bulb and LED running light included
- Half assembly: HID bulbs, ballasts, and high-voltage wires are NOT included; reuse yours
Installation
- Disconnect the battery. Remove the six upper fascia retainers and the two upper 10 mm bolts.
- Remove the three T20 fender-liner screws on each side and fold the liner back, then remove the three 10 mm fender-to-fascia nuts per side.
- Remove the two lower 10 mm bolts, unplug the fascia harness and lift the fascia off onto a towel.
- Remove the four 7 mm headlamp screws, lift the lamp, unplug it and install the new one; move your D3S bulbs/ballasts if needed, refit and aim.
Steps compiled from LS1Tech Camaro headlight how-to, Camaro6 fascia removal threads, Remont-bampera 2016-2024 Camaro guide. Professional installation and headlight aiming are recommended.
FAQs
What bulbs do these headlights use?
Per the listing: D3S low beam (not included, reuse yours), 7440NA turn signal and LED running light included.
Will these fit a halogen Camaro?
No. These are for cars with factory HID headlights.
Do I need to remove the front bumper to replace these headlights?
Yes. The front fascia comes off (upper retainers and bolts, fender-liner screws, fender nuts, lower bolts), then four 7 mm screws hold each headlamp.
Can I install HID or LED kits?
Not applicable. These are factory-style HID/Xenon housings; reuse your factory HID bulbs and ballasts.