LED Headlights Pair for Toyota Avalon (2019-2021)

These full LED headlights give a 2019-2021 Avalon a cleaner, brighter face. A white DRL bar, projector high and low beams, amber turn signals, and a short start-up animation replace tired factory lamps with a matched left-and-right pair.

Features

• Full LED lighting. High beam, low beam, DRL, turn signal, and side marker functions are built in. Color temperature is 6500K, with a rated draw of 48-70W on a 12V system.
• Start-up animation. The running lights play a few seconds of animation when they come on.
• Black housings with clear lenses. Polished, smooth finish over a sealed assembly.
• Sealed and certified. The housings are rated IP68 and carry DOT, ISO, and SAE certifications as documented for this pair.
• Complete pair. Driver and passenger assemblies, with the LED modules included. Professional installation is recommended.

Signs It's Time to Upgrade Your Headlights

• The factory housings have hazed or the DRLs no longer look even from side to side.
• You want a crisp 6500K LED bar and projectors instead of a tired stock face.
• You like a short start-up animation when the lights come on — a detail the factory lamps do not offer.
• You're replacing a damaged assembly and want a matched pair so both sides look and light the same.

Why Drivers Love This LED Pair

• The continuous DRL bar suits the 2019-2021 Avalon front end and looks finished in daylight and after dark.
• A few seconds of start-up animation adds a bit of ceremony when you start the car.
• High, low, DRL, turn, and side marker lighting are all in the housing.
• We ship both sides together, built to plug into the factory connectors.

Specifications

• Lighting technology: LED (modules included)
• Functions: High beam, low beam, DRL, turn signal, side light
• Color temperature: 6500K
• Wattage: 48-70W
• Voltage: 12V
• Housing / lens: Black housing, clear lens, polished / smooth finish
• Water resistance: IP68
• Certifications: DOT, ISO, and SAE as documented
• Warranty: 1 year
• Sold as: Pair (driver and passenger)
• Fitment: 2019-2021 Toyota Avalon, including Hybrid, XLE, XSE, Limited, Touring, and TRD trims as documented

What's in the box

• 1 x driver-side (left) LED headlight assembly
• 1 x passenger-side (right) LED headlight assembly

Installation on the 2019-2021 Toyota Avalon

On the 2019-2021 Avalon, the front bumper cover comes off to reach the headlight assemblies. Disconnect the battery, open the hood, and remove the upper grille trim and its clips and screws. Take out the lower bumper screws, turn the wheels out, and release the front of each fender liner so you can remove the bumper-to-fender screw at each corner.

Release the bumper corner latches and, with an assistant, ease the cover forward. Disconnect any bumper electrical connectors as you go. With the cover off, unplug each headlight harness, remove the mounting screws, and lift the assembly out.

Set the new lamps in place, reconnect the harnesses, and reinstall the bumper cover in reverse order, making sure every clip and corner screw is seated. Confirm high beam, low beam, DRL, turn, side marker, and the start-up animation, then aim the lamps on level ground. Professional installation is recommended.

FAQ

What years and trims does this fit?
2019, 2020, and 2021 Toyota Avalon, including Hybrid, XLE, XSE, Limited, Touring, and TRD trims. It is not documented for 2022 or later.

Do I have to remove the bumper?
Yes. On this Avalon, the bumper cover is removed to access the headlight mounting screws.

Is this a pair?
Yes. The box includes both the driver-side and passenger-side assemblies.

What warranty do we include?
These headlights are covered by a 1-year warranty.